Author Topic: Ultraseps question....  (Read 2627 times)

Offline Appstro

  • Full Member
  • ***
  • Posts: 183
Ultraseps question....
« on: March 01, 2014, 09:44:06 AM »
I was wondering if its possible to print an extra dark separation from
photoshop from ultraseps. I just recently bought ultraseps and I don’t
have a rip. I have an Epson 1430 and positives to print to. Do you have any
idea how to do this?  I have been able to select photo quality and get good
looking separations out of illustrator, but I have also made sure that all
my artwork has been 4/c black, for each separation. Just wondering how I
should handle it in Photoshop with ultraseps.


Offline screenprintguy

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1677
  • Constantly thanking the Lord!
Re: Ultraseps question....
« Reply #1 on: March 01, 2014, 12:39:58 PM »
We use ultra seps and love it. My advice would be to email Steve the owner directly. Hes very cool to work with, quick to reply.  And since ge created the wares, he can teach you everything you need.
Evolutionary Screen Printing & Embroidery
3521 Waterfield Parkway Lakeland, Fl. 33803 www.evolutionaryscreenprinting.com

Offline tpitman

  • Gonzo Member
  • ******
  • Posts: 1059
Re: Ultraseps question....
« Reply #2 on: March 01, 2014, 01:51:32 PM »
I don't use an Epson, but on my HP9800 I go into the print dialog box where there are controls to increase density and bump up individual colors. I output all halftone work through Ghostscript. You might want to noodle around in the printer dialog box, maybe looking at advanced features if there are any, and make appropriate adjustments. I get decently dark film from there, and Ghostscript has no mechanism for increasing ink density like some of the commercial RIPs do.
Just a suggestion.
Work is the curse of the drinking class . . .

Offline screenxpress

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2422
Re: Ultraseps question....
« Reply #3 on: March 01, 2014, 04:00:24 PM »
Ultraseps actions at the bottom has -

Output Halftones no RIP at 25 to 60 lpi - Save the image first before letting it convert and give it a shot. 

Read the info first box and follow the steps. 

Note if you select STOP anywhere in the process, an action will show bright red - click any of the actions showing a 'period' to clear.

I looked on the internet and your printer does not appear to have the extra setting that HP has.

Anything important is never left to the vote of the people. We only get to vote on some man; we never get to vote on what he is to do.  Will Rogers

Offline Frog

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 13945
  • Docendo discimus
Re: Ultraseps question....
« Reply #4 on: March 01, 2014, 04:06:23 PM »
Ultraseps actions at the bottom has -



I looked on the internet and your printer does not appear to have the extra setting that HP has.

That may be tweakable as a product of quality and paper type settings.
On the old 3000's, I think that "Backlit Film" was the hot set-up.
That rug really tied the room together, did it not?

Offline screenxpress

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2422
Re: Ultraseps question....
« Reply #5 on: March 01, 2014, 09:41:45 PM »
I think he was already using Best for print setting, but ur right. 

A little trial and error with maybe using "transparencies" as a paper option.
Anything important is never left to the vote of the people. We only get to vote on some man; we never get to vote on what he is to do.  Will Rogers

Offline sben763

  • Verified/Junior
  • **
  • Posts: 83
Re: Ultraseps question....
« Reply #6 on: March 01, 2014, 10:39:33 PM »
You can simply use the halftone convertor in ultraseps. Then print directly from photoshop to the 1430 using photo or best photo and ultra premium or premium glossy setting.  If you need to darken up click advanced and color controls and crank up the saturation.