« previous next »
Pages: [1] 2   Go Down

Author Topic: WANTED: MHM pin adapters for Newman frames  (Read 6199 times)

Offline blue moon

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 6356
WANTED: MHM pin adapters for Newman frames
« on: April 24, 2014, 02:13:39 PM »
'just bought some frames and need the pins for them. There are at least two different versions of the pins and we need the ones with narrower body (1 1/8th wide opening).

pierre
Logged
Yes, we've won our share of awards, and yes, I've tested stuff and read the scientific papers, but ultimately take everything I say with more than just a grain of salt! So if you are looking for trouble, just do as I say or even better, do something I said years ago!

Offline Sbrem

  • Ludicrous Speed Member
  • *******
  • Posts: 6041
Re: WANTED: MHM pin adapters for Newman frames
« Reply #1 on: April 24, 2014, 02:37:51 PM »
We bought ours directly from Newman if I remember correctly...

Steve
Logged
I made a mistake once; I thought I was wrong about something; I wasn't

Offline Denis Kolar

  • Gonzo Member
  • ******
  • Posts: 2871
Re: WANTED: MHM pin adapters for Newman frames
« Reply #2 on: April 24, 2014, 02:48:08 PM »
You back already?
Logged

Offline ebscreen

  • !!!
  • Gonzo Member
  • ******
  • Posts: 4243
Re: WANTED: MHM pin adapters for Newman frames
« Reply #3 on: April 24, 2014, 02:58:16 PM »
How many sets do you need?
Logged

Offline blue moon

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 6356
Re: WANTED: MHM pin adapters for Newman frames
« Reply #4 on: April 24, 2014, 03:25:08 PM »
Quote from: ebscreen on April 24, 2014, 02:58:16 PM
How many sets do you need?

16 sets to start with, but will take anything.

I have some of the wider ones if you can use those!

pierre
Logged
Yes, we've won our share of awards, and yes, I've tested stuff and read the scientific papers, but ultimately take everything I say with more than just a grain of salt! So if you are looking for trouble, just do as I say or even better, do something I said years ago!

Offline blue moon

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 6356
Re: WANTED: MHM pin adapters for Newman frames
« Reply #5 on: April 24, 2014, 03:25:22 PM »
Quote from: Sbrem on April 24, 2014, 02:37:51 PM
We bought ours directly from Newman if I remember correctly...

Steve

any idea on the price?

pierre
Logged
Yes, we've won our share of awards, and yes, I've tested stuff and read the scientific papers, but ultimately take everything I say with more than just a grain of salt! So if you are looking for trouble, just do as I say or even better, do something I said years ago!

Offline blue moon

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 6356
Re: WANTED: MHM pin adapters for Newman frames
« Reply #6 on: April 24, 2014, 03:25:46 PM »
Quote from: DKgrafix on April 24, 2014, 02:48:08 PM
You back already?

came back this morning!

pierre
Logged
Yes, we've won our share of awards, and yes, I've tested stuff and read the scientific papers, but ultimately take everything I say with more than just a grain of salt! So if you are looking for trouble, just do as I say or even better, do something I said years ago!

Offline ebscreen

  • !!!
  • Gonzo Member
  • ******
  • Posts: 4243
Re: WANTED: MHM pin adapters for Newman frames
« Reply #7 on: April 24, 2014, 03:32:19 PM »
Can you post a pic of the type your are looking for? We have three different styles, only one of which I don't like, though
all function exactly the same.
Logged

Offline blue moon

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 6356
Re: WANTED: MHM pin adapters for Newman frames
« Reply #8 on: April 24, 2014, 03:42:04 PM »
Quote from: ebscreen on April 24, 2014, 03:32:19 PM
Can you post a pic of the type your are looking for? We have three different styles, only one of which I don't like, though
all function exactly the same.

unfortunately, I don't have anything that will fit in the frames we just bought.
Here's what we do have (on a sample new MZX) and it's too wide by about a 1/8th of an inch on the used screens.

pierre
Logged
Yes, we've won our share of awards, and yes, I've tested stuff and read the scientific papers, but ultimately take everything I say with more than just a grain of salt! So if you are looking for trouble, just do as I say or even better, do something I said years ago!

Offline Sbrem

  • Ludicrous Speed Member
  • *******
  • Posts: 6041
Re: WANTED: MHM pin adapters for Newman frames
« Reply #9 on: April 24, 2014, 05:03:51 PM »
Quote from: blue moon on April 24, 2014, 03:25:22 PM
Quote from: Sbrem on April 24, 2014, 02:37:51 PM
We bought ours directly from Newman if I remember correctly...

Steve

any idea on the price?


pierre

$40 per set, I'm pretty sure. I see you know there are different ones for the different frames... they also make your frames off center, so watch that, but I'm pretty sure you'll catch that, it's pretty obvious

Steve

Steve
Logged
I made a mistake once; I thought I was wrong about something; I wasn't

Offline ebscreen

  • !!!
  • Gonzo Member
  • ******
  • Posts: 4243
Re: WANTED: MHM pin adapters for Newman frames
« Reply #10 on: April 24, 2014, 05:28:05 PM »
We actually have 4 types, just found one I've never seen. Pic attached.
I'm spacing on what measurement is critical to you.


Logged

Offline jsheridan

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2130
Re: WANTED: MHM pin adapters for Newman frames
« Reply #11 on: April 24, 2014, 06:17:14 PM »
Quote from: blue moon on April 24, 2014, 03:42:04 PM

Here's what we do have (on a sample new MZX) and it's too wide by about a 1/8th of an inch on the used screens.

pierre

An angle grinder will make quick work of that for you. For the price of the pins new, you're best off making these fit your frames.
Logged
Blacktop Graphics Screenprinting and Consulting Services

Offline papinc

  • Verified/Junior
  • **
  • Posts: 40
Re: WANTED: MHM pin adapters for Newman frames
« Reply #12 on: April 25, 2014, 10:48:55 AM »
Pierre,

I have a box of these...a couple of different styles. (Didn't count them...but there are quite a few).

Would they be of any use?

Let me know.

Keith
« Last Edit: April 25, 2014, 10:51:20 AM by papinc »
Logged

Offline blue moon

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 6356
Re: WANTED: MHM pin adapters for Newman frames
« Reply #13 on: April 25, 2014, 01:20:49 PM »
Quote from: papinc on April 25, 2014, 10:48:55 AM
Pierre,

I have a box of these...a couple of different styles. (Didn't count them...but there are quite a few).

Would they be of any use?

Let me know.

Keith

I am pretty sure that the one on the right is what we need! Sending PM!

thanx,

pierre
Logged
Yes, we've won our share of awards, and yes, I've tested stuff and read the scientific papers, but ultimately take everything I say with more than just a grain of salt! So if you are looking for trouble, just do as I say or even better, do something I said years ago!

Offline blue moon

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 6356
Re: WANTED: MHM pin adapters for Newman frames
« Reply #14 on: April 25, 2014, 01:26:13 PM »
Quote from: ebscreen on April 24, 2014, 05:28:05 PM
We actually have 4 types, just found one I've never seen. Pic attached.
I'm spacing on what measurement is critical to you.

I am just measuring the bottom width. Do you have extras? I would imagine you'd be using them!

pierre
Logged
Yes, we've won our share of awards, and yes, I've tested stuff and read the scientific papers, but ultimately take everything I say with more than just a grain of salt! So if you are looking for trouble, just do as I say or even better, do something I said years ago!
Pages: [1] 2   Go Up
« previous next »