Author Topic: Embroidery  (Read 4825 times)

Offline Big Frank Sports

  • Verified/Junior
  • **
  • Posts: 53
Embroidery
« on: April 19, 2011, 10:36:46 AM »
I also do embroidery but NOT the digitizing.  I will see if my customers will allow me to post some pics.

Frank
Frank Allnutt
Your Logo, Motto or Photo on just about ANYTHING! 304-982-7159 - don't let the video phone intro SCARE ya!


Offline shellyky

  • Sr. Member
  • ****
  • Posts: 289
Re: Embroidery
« Reply #1 on: April 19, 2011, 11:38:47 AM »
cool look forward to seeing it!

Offline evilcaps

  • Verified/Junior
  • **
  • Posts: 31
Re: Embroidery
« Reply #2 on: April 27, 2011, 04:07:16 PM »
How about this....

Offline shellyky

  • Sr. Member
  • ****
  • Posts: 289
Re: Embroidery
« Reply #3 on: April 27, 2011, 04:10:37 PM »
wow ive never tried such a wide satin on puff--is that more than 3mm foam to achieve that?....where are yougetting new era blanks? lol 
great stuff!

Offline evilcaps

  • Verified/Junior
  • **
  • Posts: 31
Re: Embroidery
« Reply #4 on: April 27, 2011, 04:25:10 PM »
Sanmar

Offline evilcaps

  • Verified/Junior
  • **
  • Posts: 31
Re: Embroidery
« Reply #5 on: April 27, 2011, 04:27:50 PM »
Here is another one!

Offline shellyky

  • Sr. Member
  • ****
  • Posts: 289
Re: Embroidery
« Reply #6 on: April 27, 2011, 04:33:56 PM »
what kind of emb machine are you using? i havent been able to pull anything larger than a 2.25" tall design on our SWF but that may be due to the height of the cap itself i suppose.

oh ok so theyre not fitted, its the snapbacks? gotcha
« Last Edit: April 27, 2011, 04:36:00 PM by shellyky »

Offline ftembroidery

  • !!!
  • Full Member
  • ***
  • Posts: 233
  • Just got new glasses, but I'm still disillusioned
Re: Embroidery
« Reply #7 on: April 27, 2011, 04:49:00 PM »
SanMar's New Era caps DO offer fitted or "flexfit-like".  Nice hats, sew well.
Grant me the ability to change the things I can, the strength to accept the things I cannot and the wisdom to recognize the difference.

Offline evilcaps

  • Verified/Junior
  • **
  • Posts: 31
Re: Embroidery
« Reply #8 on: April 27, 2011, 04:52:20 PM »
yep Snapcaks.

Well I use Barudan elite xl for samples and Tajima TMFX 1204 for production.

I've never seen a SWF in action, I can go up to 2.65" high on both machines, here is a logo 2.65"H

Offline ftembroidery

  • !!!
  • Full Member
  • ***
  • Posts: 233
  • Just got new glasses, but I'm still disillusioned
Re: Embroidery
« Reply #9 on: April 27, 2011, 04:57:12 PM »
When we have to sew something tall or way offset to one side, we use the Tajima 270 degree hoop, but otherwise we try to keep it at or below 2" and use the EMS/Hooptech hoops and our P&F Equip. hat hooper.  Our machines are all Tajimas.
Grant me the ability to change the things I can, the strength to accept the things I cannot and the wisdom to recognize the difference.

Offline evilcaps

  • Verified/Junior
  • **
  • Posts: 31
Re: Embroidery
« Reply #10 on: April 27, 2011, 05:01:32 PM »
EMS/Hooptech
Are these hoops ok? Never tried one , hold registration ok?

I understand it's only for the front  of the cap, but seems like old type cap hoops.



Offline shellyky

  • Sr. Member
  • ****
  • Posts: 289
Re: Embroidery
« Reply #11 on: April 27, 2011, 05:24:35 PM »
on SWF, you basically need to be at least 1" up from the bill to sew properly or it wil hit the "teeth" in the hoop...i'd give anything to sew that low on a hat, thats amazing...as far as going 'higher', maxes out at about 2" because the arm will start hitting the top of the hat and distort left to right movement

i was looking for blank 59fiftys at wholesale rate but i dont think that happens...

do you do the embroidery for Grenade Clothing?
« Last Edit: April 27, 2011, 05:34:02 PM by shellyky »

Offline ftembroidery

  • !!!
  • Full Member
  • ***
  • Posts: 233
  • Just got new glasses, but I'm still disillusioned
Re: Embroidery
« Reply #12 on: April 27, 2011, 05:44:16 PM »
They hold registration quite nicely.  That coupled with the P&F Equip. hooper which utilizes a foot-operated stretching device makes the hat as tight as it can get and still maintain its curved shape.  I don't personally like Hooptechs framing gauge.  Not enough power/leverage and while hooping, requires more hands than I was born with (just my opinion).  Yes, the EMS is primarily for the front, although I've often used it successfully on the back.  When the design has to be drastically offset to one side of the bill, I have to use the 270 hoop.

Check out the EMS/Hooptech here:   www.hooptechproducts.com

Check out the P&F Hoopers here:  www.pfequipment.com
Grant me the ability to change the things I can, the strength to accept the things I cannot and the wisdom to recognize the difference.

Offline evilcaps

  • Verified/Junior
  • **
  • Posts: 31
Re: Embroidery
« Reply #13 on: April 27, 2011, 07:02:16 PM »
Nice info.

Yep we did 1 time deal for those guys.



Offline evilcaps

  • Verified/Junior
  • **
  • Posts: 31
Re: Embroidery
« Reply #14 on: April 28, 2011, 02:28:47 PM »
Hey guys I have 2 more designs.

What u think?