Author Topic: I Image S  (Read 6778 times)

Offline 1964GN

  • Hero Member
  • *****
  • Posts: 815
Re: I Image S
« Reply #45 on: October 23, 2018, 07:15:20 AM »
We shipped a screen to Chicago to see if they would set it up for ROQ pins. A flat "No" for anyone wondering. Their lack of flexibility is one of the many things that turn us off from M&R products.


Offline pwalsh

  • !!!
  • Sr. Member
  • ****
  • Posts: 473
Re: I Image S
« Reply #46 on: October 23, 2018, 09:06:33 AM »
Please drop me an email at Peter.Walsh@mrprint.com with you contact information and I will see what can be worked out regarding compatibility with the M&R I-Image S and the ROQ screen frame pin set-up.  You should not have received a flat no response on this issue.
Peter G. Walsh - Executive Vice President
The M&R Companies - Roselle, IL USA
Email:  peter.walsh@mrprint.com
Office 847-410-3445 / Cell 913-579-6662

Offline Alex M

  • !!!
  • Sr. Member
  • ****
  • Posts: 257
Re: I Image S
« Reply #47 on: October 23, 2018, 09:34:47 AM »
I know when I was there I had built machines with the 42cm pins for both ROQ and MHM.
Alex Mammoser
Director of Sales
Easiway Systems
Mobile: +1 630 220 6588
alex@easiway.com

Offline pwalsh

  • !!!
  • Sr. Member
  • ****
  • Posts: 473
Re: I Image S
« Reply #48 on: October 23, 2018, 10:16:43 AM »
We shipped a screen to Chicago to see if they would set it up for ROQ pins. A flat "No" for anyone wondering. Their lack of flexibility is one of the many things that turn us off from M&R products.

Can you confirm what the maximum and standard size screen frame you are running on your ROQ press.  The I-Image S accommodates a maximum 26" x 36" format frame with the standard M&R Tri-Sync set-up.  I'm estimating that that we would lose about 1" to 1.5" from the max frame length to accommodate the ROQ pin adapters at both ends of the frame.  If this is a problem, we could look at the larger format I-Image ST or STE units that accommodate a maximum 26" x 43" frame size.   
Peter G. Walsh - Executive Vice President
The M&R Companies - Roselle, IL USA
Email:  peter.walsh@mrprint.com
Office 847-410-3445 / Cell 913-579-6662

Offline Alex M

  • !!!
  • Sr. Member
  • ****
  • Posts: 257
Re: I Image S
« Reply #49 on: October 23, 2018, 12:37:42 PM »
We shipped a screen to Chicago to see if they would set it up for ROQ pins. A flat "No" for anyone wondering. Their lack of flexibility is one of the many things that turn us off from M&R products.

Can you confirm what the maximum and standard size screen frame you are running on your ROQ press.  The I-Image S accommodates a maximum 26" x 36" format frame with the standard M&R Tri-Sync set-up.  I'm estimating that that we would lose about 1" to 1.5" from the max frame length to accommodate the ROQ pin adapters at both ends of the frame.  If this is a problem, we could look at the larger format I-Image ST or STE units that accommodate a maximum 26" x 43" frame size.   
Exactly! PW knows all!
Alex Mammoser
Director of Sales
Easiway Systems
Mobile: +1 630 220 6588
alex@easiway.com

Offline 1964GN

  • Hero Member
  • *****
  • Posts: 815
Re: I Image S
« Reply #50 on: October 23, 2018, 02:22:16 PM »
We shipped a screen to Chicago to see if they would set it up for ROQ pins. A flat "No" for anyone wondering. Their lack of flexibility is one of the many things that turn us off from M&R products.

Can you confirm what the maximum and standard size screen frame you are running on your ROQ press.  The I-Image S accommodates a maximum 26" x 36" format frame with the standard M&R Tri-Sync set-up.  I'm estimating that that we would lose about 1" to 1.5" from the max frame length to accommodate the ROQ pin adapters at both ends of the frame.  If this is a problem, we could look at the larger format I-Image ST or STE units that accommodate a maximum 26" x 43" frame size.   

Email just sent. 23x31 statics. The digital department has one of our frames in hand.

Offline 1964GN

  • Hero Member
  • *****
  • Posts: 815
Re: I Image S
« Reply #51 on: October 24, 2018, 11:42:23 AM »
A quick follow up on our situation. Peter took the time to look into this and contacted our owner today. They will set this up for ROQ pins using 23x31 frames. Larger frames could be an issue though, at least as far as the S is concerned.

Thank you for taking the time on this. Proving solutions is part of what manufactures need to do and we truly appreciate your effort. Looks like we will be a shop with a brand new M&R i-Image S and Uni-Kote in the near future.

Offline markdhl

  • Verified/Junior
  • **
  • Posts: 59
Re: I Image S
« Reply #52 on: October 24, 2018, 01:41:52 PM »
Douthitt has the wax jet available for the roq pins or pru AND for 23 x 31 or 25 x 36 or both.  We offer the speed but the wax quality.

Please contact me for more information directly at 313 515 8635

Mark Diehl
Douthitt Corporation
313 515 8635

Offline blue moon

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 6355
Re: I Image S
« Reply #53 on: October 28, 2018, 10:41:42 AM »
A quick follow up on our situation. Peter took the time to look into this and contacted our owner today. They will set this up for ROQ pins using 23x31 frames. Larger frames could be an issue though, at least as far as the S is concerned.

Thank you for taking the time on this. Proving solutions is part of what manufactures need to do and we truly appreciate your effort. Looks like we will be a shop with a brand new M&R i-Image S and Uni-Kote in the near future.

Peter is a class act! We all know that! Thank you Peter for looking out.

pierre
Yes, we've won our share of awards, and yes, I've tested stuff and read the scientific papers, but ultimately take everything I say with more than just a grain of salt! So if you are looking for trouble, just do as I say or even better, do something I said years ago!

Offline RICK STEFANICK

  • Gonzo Member
  • ******
  • Posts: 1925
  • INDUSTRY CONSULTANT-OPERATIONS SPECIALIST
Re: I Image S
« Reply #54 on: October 29, 2018, 03:07:53 PM »
A quick follow up on our situation. Peter took the time to look into this and contacted our owner today. They will set this up for ROQ pins using 23x31 frames. Larger frames could be an issue though, at least as far as the S is concerned.

Thank you for taking the time on this. Proving solutions is part of what manufactures need to do and we truly appreciate your effort. Looks like we will be a shop with a brand new M&R i-Image S and Uni-Kote in the near future.

How about Gauntlet 3's also?? 
Specializing in shop assessment's, flow and efficiency