Author Topic: Printing on a Ice Gray Tee  (Read 1317 times)

Offline Logoman

  • Sr. Member
  • ****
  • Posts: 343
  • Life is what happens while your making other plans
Printing on a Ice Gray Tee
« on: November 23, 2016, 11:30:45 PM »
I have a customer wanting this printed on an Ice Grey Shirt. What process would anyone use (Spot, 4 C Process, Sim).? Looking for suggestions.


Offline Colin

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1538
  • Ink and Chemical Product Manager
Re: Printing on a Ice Gray Tee
« Reply #1 on: November 24, 2016, 12:02:17 AM »
How many pieces?

Manual/auto?

number of open heads?

Proficiency with all methods?
Been in the industry since 1996.  5+ years with QCM Inks.  Been a part of shops of all sizes and abilities both as a printer and as an Artist/separator.  I am now the Ink and Chemical Product Manager at Ryonet.

Offline Logoman

  • Sr. Member
  • ****
  • Posts: 343
  • Life is what happens while your making other plans
Re: Printing on a Ice Gray Tee
« Reply #2 on: November 24, 2016, 12:44:50 AM »
400 pieces
auto
8/10

Offline Gilligan

  • !!!
  • Ludicrous Speed Member
  • *******
  • Posts: 6775
Re: Printing on a Ice Gray Tee
« Reply #3 on: November 24, 2016, 01:40:54 AM »
Wow, who's printing 400 of these?

Kid must have cancer or something I assume.

Offline jvanick

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2475
Re: Printing on a Ice Gray Tee
« Reply #4 on: November 24, 2016, 08:20:03 AM »
Since there's already a good bit of white in the image, I would personally go sim process.  it would be easier to keep the job consistent across the run, the red and the blue would be solid colors (vs a bunch of a halftones), and it would be an easier print to pull off that way.