Author Topic: One Stroke Inks new ink  (Read 14256 times)

Offline Sbrem

  • Ludicrous Speed Member
  • *******
  • Posts: 6035
Re: One Stroke Inks new ink
« Reply #45 on: July 31, 2017, 12:16:24 PM »
Also Tom what about the drying in the screens? does it really act like a plastisol and you leave it and come back with worry.

No drying in the screens. Has a consistency slightly thicker then process ink. All colors were printed through 300 s-mesh. White was hit twice while wet, flashed, then the last three wet on wet.

I was wondering about the white, double stroke of course. When we tested the white, the single hit was pleasing, but PFP not so much. Sometimes I'm so busy I forget the obvious.

Steve
I made a mistake once; I thought I was wrong about something; I wasn't


Offline Robert Clark

  • Full Member
  • ***
  • Posts: 114
Re: One Stroke Inks new ink
« Reply #46 on: July 31, 2017, 02:55:21 PM »
This print was all Watercolor

156 WC White
Flash
Colors was put thru 200 mesh ( WOW )
156 Highlight White
Cure 320

Very soft print !

Hope this helps
Robert Clark
One Stroke Inks
Senior Account Manager
rclark@osinks.com
(800)942-4447

Offline rmonks

  • !!!
  • Sr. Member
  • ****
  • Posts: 457
Re: One Stroke Inks new ink
« Reply #47 on: July 31, 2017, 05:33:03 PM »
Any one using One Strokes new water color plastisol inks Pros/Cons this what they say

Replace water-based inks with a plastisol inks and get your freedom back.  No longer do you need a special emulsion.  Ink will not dry in your screen.  You won't need excessive cure times to evaporate the water in the ink.  Watercolor solves so many problems.

I have been using their water color inks for about 6 months. PRO's Prints like water color soft feel. CON's you need a spoon to get it from the bucket to the screen it is runny, you got to be fast using  spatula. Also using their white Hybrid, flashes fast. Good opacity. One pass works on some things, other need pfp. 

Offline Sbrem

  • Ludicrous Speed Member
  • *******
  • Posts: 6035
Re: One Stroke Inks new ink
« Reply #48 on: July 31, 2017, 05:48:53 PM »
This print was all Watercolor

156 WC White
Flash
Colors was put thru 200 mesh ( WOW )
156 Highlight White
Cure 320

Very soft print !

Hope this helps

It does, thanks, keeps the guess work down...

Steve
I made a mistake once; I thought I was wrong about something; I wasn't

Offline IntegriTees

  • Full Member
  • ***
  • Posts: 178
Re: One Stroke Inks new ink
« Reply #49 on: May 01, 2018, 02:05:39 PM »
digging this back up.  Who has continued working with the Watercolor series?