« previous next »
Pages: [1]   Go Down

Author Topic: How would you print this?  (Read 728 times)

Offline jwcarder

  • Verified/Junior
  • **
  • Posts: 35
How would you print this?
« on: August 07, 2017, 05:20:36 PM »
We have a 6-color auto and 1 flash. Around 200 shirts, but I don't have a problem running revolver if needed. It will all be printed in plastisol.
Logged

Offline Colin

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1610
  • Ink and Chemical Product Manager
Re: How would you print this?
« Reply #1 on: August 07, 2017, 05:40:38 PM »
If you have a manual flash, can you slide it into an open head?

If so:

Base white
Flash
Grey
Black
Flash
Highlight White


Depending on your skill and comfort.  You can potentially skip the flash after the black screen.
Logged
Been in the industry since 1996.  5+ years with QCM Inks.  Been a part of shops of all sizes and abilities both as a printer and as an Artist/separator.  I am now the Ink and Chemical Product Manager at Ryonet.
Pages: [1]   Go Up
« previous next »