Author Topic: 97 Guantlet 2 acting up  (Read 3615 times)

Offline cbjamel

  • Gonzo Member
  • ******
  • Posts: 1088
97 Guantlet 2 acting up
« on: August 17, 2017, 06:55:07 PM »
I think sensor  but i have tried replacing front and rear does same thing. What am i missing.
Video of it.

https://goo.gl/photos/tCvSXuJdTsFV8u2C8

Thanks,
Shane


Offline dirkdiggler

  • Gonzo Member
  • ******
  • Posts: 1803
Re: 97 Guantlet 2 acting up
« Reply #1 on: August 17, 2017, 10:14:55 PM »
Can you go under the machine and manually press the mac valve?  Press it a bunch of times and see if it keeps doing that.  It could be bad.
If he gets up, we'll all get up, IT'LL BE ANARCHY!-John Bender

Offline CGS

  • Verified/Junior
  • **
  • Posts: 84
Re: 97 Guantlet 2 acting up
« Reply #2 on: August 17, 2017, 10:22:47 PM »
Pneumatic issue -- Mac valve or stroke cylinder,  since it looks like an air drive print head, is sticking, or has a nick / fold over on seal and is blowing by at times

Offline cbjamel

  • Gonzo Member
  • ******
  • Posts: 1088
Re: 97 Guantlet 2 acting up
« Reply #3 on: August 17, 2017, 10:38:34 PM »
i will look and see. Thanks guys for the ideas.
Shane

Sent from my SAMSUNG-SM-G890A using Tapatalk


Offline cbjamel

  • Gonzo Member
  • ******
  • Posts: 1088
Re: 97 Guantlet 2 acting up
« Reply #4 on: August 18, 2017, 09:43:59 PM »
OK did the press the button alot waont do it on the stroke or choppers. So i made head in front and no problem. So  i will call next week to M & R and see what they think.

Shane