Author Topic: Rat problem in our shop  (Read 3087 times)

Offline TH Apparel

  • Verified/Junior
  • **
  • Posts: 93
Re: Rat problem in our shop
« Reply #15 on: October 19, 2017, 06:42:35 AM »
Get a Hawk.  They will eat rats.
Sorry...I'm no help at all.

How are rats with loud noises?  Like would leaving a radio on over night help keep them away?


Offline RICK STEFANICK

  • Gonzo Member
  • ******
  • Posts: 1925
  • INDUSTRY CONSULTANT-OPERATIONS SPECIALIST
Re: Rat problem in our shop
« Reply #16 on: October 19, 2017, 08:59:46 AM »
I know the radio thing works with snakes. I have been down that road.
Specializing in shop assessment's, flow and efficiency

Offline Homer

  • !!!
  • Gonzo Member
  • ******
  • Posts: 3162
Re: Rat problem in our shop
« Reply #17 on: October 19, 2017, 09:20:05 AM »
killing them will only satisfy your anger...There are way too many to battle. you don't need traps, you need a deterrent like moth balls, peppermint oil, dryer sheets, barn owl... Start with plugging all the holes and access points. Once the infestation settles down, then move on to traps. This is also a great excuse to enter the world of PCP air guns...If this isn't possible, then move. All you need is rat poop in a box of finished product ...health code violation for employees..sounds troublesome
...keep doing what you're doing, you'll only get what you've got...

Offline Gilligan

  • !!!
  • Ludicrous Speed Member
  • *******
  • Posts: 6853
Re: Rat problem in our shop
« Reply #18 on: October 19, 2017, 09:50:25 AM »
Im going pick up my mouse version of this right now.

https://www.amazon.com/Victor-Electronic-Rat-Trap-Reusable/dp/B000LNX06C

I was literally sitting at my desk last night with an air soft pistol waiting to see a mouse show himself again.

Done with that nonsense!

Offline RICK STEFANICK

  • Gonzo Member
  • ******
  • Posts: 1925
  • INDUSTRY CONSULTANT-OPERATIONS SPECIALIST
Re: Rat problem in our shop
« Reply #19 on: October 19, 2017, 10:22:18 AM »
killing them will only satisfy your anger...There are way too many to battle. you don't need traps, you need a deterrent like moth balls, peppermint oil, dryer sheets, barn owl... Start with plugging all the holes and access points. Once the infestation settles down, then move on to traps. This is also a great excuse to enter the world of PCP air guns...If this isn't possible, then move. All you need is rat poop in a box of finished product ...health code violation for employees..sounds troublesome

killing them will only satisfy your anger...There are way too many to battle  WELL SAID!!
Specializing in shop assessment's, flow and efficiency

Offline Gilligan

  • !!!
  • Ludicrous Speed Member
  • *******
  • Posts: 6853
Re: Rat problem in our shop
« Reply #20 on: October 19, 2017, 01:13:19 PM »
Rats are definitely different than Mice, but the Victor mouse electric mouse trap can absolutely eradicate them.

I'm a live and let live guy, but if you have an infestation, that trap is the answer.  It kills them (humanely), then drops them in a tray and resets itself.  Can kill 10 at a time before you empty and reset.  That will put a serious dent in the population.

Also, they can't see that anyone died, so there is no deterrent for them to learn.

Offline Gilligan

  • !!!
  • Ludicrous Speed Member
  • *******
  • Posts: 6853

Offline mk162

  • Ludicrous Speed Member
  • *******
  • Posts: 7790
Re: Rat problem in our shop
« Reply #22 on: October 19, 2017, 01:34:29 PM »
that's cool.  They aren't stupid animals.  just gotta build a better mousetrap.

You will have to really seal the entry points.  I've heard they don't like to chew great stuff foam, but I doubt that is true.  You will need to use metal flashing to seal the entry points.

Offline Gilligan

  • !!!
  • Ludicrous Speed Member
  • *******
  • Posts: 6853
Re: Rat problem in our shop
« Reply #23 on: October 19, 2017, 04:21:39 PM »

Offline jsheridan

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2130
Re: Rat problem in our shop
« Reply #24 on: October 20, 2017, 12:15:47 AM »
Get this stuff.

We use it for bee proofing.  Nothing wants to eat through copper mesh. Lol

https://www.amazon.com/Stuf-Fit-Copper-Mesh-Birds-Control/dp/B0001IMLTY/ref=sr_1_1?ie=UTF8&qid=1508444450&sr=8-1&keywords=stuff+it+copper+mesh

Also works really well for packing in your reflux column.. that's a good price for 100'.. might have to get some.
Blacktop Graphics Screenprinting and Consulting Services

Offline ericheartsu

  • Gonzo Member
  • ******
  • Posts: 3526
Re: Rat problem in our shop
« Reply #25 on: October 20, 2017, 08:38:46 AM »
that's cool.  They aren't stupid animals.  just gotta build a better mousetrap.

You will have to really seal the entry points.  I've heard they don't like to chew great stuff foam, but I doubt that is true.  You will need to use metal flashing to seal the entry points.

can confirm that they LOVE to chew through great stuff foam.
Night Owls
Waterbased screen printing and promo products.
www.nightowlsprint.com 281.741.7285

Offline 3Deep

  • !!!
  • Ludicrous Speed Member
  • *******
  • Posts: 5253
Re: Rat problem in our shop
« Reply #26 on: October 20, 2017, 10:00:56 AM »
We have a peanut/cotton field right behind our shop and ever now and then we get rats in the shop, couple of traps, we good to go.
Life is like Kool-Aid, gotta add sugar/hardwork to make it sweet!!

Offline Admiral

  • Hero Member
  • *****
  • Posts: 858
Re: Rat problem in our shop
« Reply #27 on: October 20, 2017, 12:29:28 PM »
We have a peanut/cotton field right behind our shop and ever now and then we get rats in the shop, couple of traps, we good to go.

They probably have something like this going on:
https://www.youtube.com/watch?v=lNFGLRR27EA&has_verified=1

Warning - bit graphic.  Kinda satisfying though since I hat rats / mice.