Author Topic: custom i-Image pusher frame?  (Read 1078 times)

Offline IntegriTees

  • Full Member
  • ***
  • Posts: 178
custom i-Image pusher frame?
« on: October 19, 2017, 04:35:04 PM »
anyone with the i-Image have any custom pusher frames made for smaller size screens?
I have 12x15 that I use for my tag press and want to be able to print the images using my new i-Image.
but i got a quote for something like $2500 for M&R to build it. 
Looking for a cheaper option.


Offline TCT

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2869
Re: custom i-Image pusher frame?
« Reply #1 on: October 19, 2017, 05:56:15 PM »
I built one out of wood on our old unit. Worked like a charm. I'll see if I can find pics. Drilled holes in the table and put dowels into the bottom of the sides so we could make whatever size pusher frame we wanted. 
Alex

Hopefully I'll never have to grow up and get a real job...

www.twincitytees.com

Offline ffokazak

  • Sr. Member
  • ****
  • Posts: 403
Re: custom i-Image pusher frame?
« Reply #2 on: October 19, 2017, 07:25:19 PM »
I took mine to a machine shop and they just replicated it exactly for our tagging screens.

Just remember to check the height with a good calibrated caliber, when its on the machine.

Last thing you need to do is scrape your heads across the pusher frame.


Offline IntegriTees

  • Full Member
  • ***
  • Posts: 178
Re: custom i-Image pusher frame?
« Reply #3 on: October 19, 2017, 11:45:47 PM »
thats exactly what i'm needing it for.  can you send me some pics of what yours look like? what size are your tag frames and what size did you decide for the pusher frame?

Offline ericheartsu

  • Gonzo Member
  • ******
  • Posts: 3522
Re: custom i-Image pusher frame?
« Reply #4 on: October 20, 2017, 08:39:09 AM »
I'd also love to see some pics!
Night Owls
Waterbased screen printing and promo products.
www.nightowlsprint.com 281.741.7285

Offline 244

  • Gonzo Member
  • ******
  • Posts: 1368
Re: custom i-Image pusher frame?
« Reply #5 on: October 20, 2017, 02:56:57 PM »
anyone with the i-Image have any custom pusher frames made for smaller size screens?
I have 12x15 that I use for my tag press and want to be able to print the images using my new i-Image.
but i got a quote for something like $2500 for M&R to build it. 
Looking for a cheaper option.
M&R only makes one for 4 screens at a time on our pusher bar. That is why the cost is high.
Rich Hoffman