Author Topic: Looking For: Manual arm adapters to M&R style plattens  (Read 2049 times)

Offline BrazosDesigns

  • Full Member
  • ***
  • Posts: 132
Looking For: Manual arm adapters to M&R style plattens
« on: November 23, 2017, 10:59:34 AM »
Hey all,

I have a Workhorse Mach 6/6 and wondered if anyone has any pallet arm adapters to convert to be able to use M&R style pallets.   

Let me know!

Thanks,
Darren


Offline Northland

  • Hero Member
  • *****
  • Posts: 619
Re: Looking For: Manual arm adapters to M&R style plattens
« Reply #1 on: November 23, 2017, 12:16:27 PM »
Hey all,

I have a Workhorse Mach 6/6 and wondered if anyone has any pallet arm adapters to convert to be able to use M&R style pallets.   


Would either of these fit ??
http://www.actionengineering.com/cat-258-1-1418/manual-bracket-adapter-2.htm
http://www.actionengineering.com/cat-258-1-1417/manual-bracket-adapter.htm

-0r-  you might be able to use your existing brackets and drill holes for Left/Right locking cams from M&R
https://www.mrprint.com/store/product/9050154-C/fabricated-parts-left-locking-cam-3-01-in-length-0-98-in-width-1-75-in-height
« Last Edit: November 23, 2017, 12:23:58 PM by Northland »

Offline BrazosDesigns

  • Full Member
  • ***
  • Posts: 132
Re: Looking For: Manual arm adapters to M&R style plattens
« Reply #2 on: November 24, 2017, 09:27:15 AM »
Thanks for the suggestions.  It would be great to order the Action version, but not in the budget right now..

I'll check specks on the parts from M&R to see if they might work.

Thanks

Offline Northland

  • Hero Member
  • *****
  • Posts: 619
Re: Looking For: Manual arm adapters to M&R style plattens
« Reply #3 on: November 24, 2017, 04:46:08 PM »
Thanks for the suggestions.  It would be great to order the Action version, but not in the budget right now..
I'll check specks on the parts from M&R to see if they might work.
Thanks
I suspect using the M&R cam locks (with M&R pallets), on your existing brackets, would elevate your pallets 1" higher than normal.... which is an issue you'd need to address.



Offline kingscreen

  • Gonzo Member
  • ******
  • Posts: 1161
Re: Looking For: Manual arm adapters to M&R style plattens
« Reply #4 on: November 26, 2017, 10:53:44 PM »
You can get them directly from Workhorse for $75.00.
Scott Garnett
King Screen