Author Topic: INK SUITABLE FOR CERAMIC FIRING  (Read 1687 times)

Offline mooseman

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2215
INK SUITABLE FOR CERAMIC FIRING
« on: December 20, 2017, 08:54:53 AM »
Met a guy yesterday who is starting a community based arts something or other. He asked if I knew anything about printing "decals" as he called them for transfer to green ceramics and suitable for kiln firing of the ceramics. the "ink" as he called it would have to endure the kiln process.
I referred him to Nazdar best i could do for him but anyone out there have any suggestions or can offer any further info on this process that I can share with him ?
Thanks
mooseman
DUE TO CIRCUMSTANCES COMPLETELY WITHIN MY CONTROL YOU SHOULD GET YOUR OWN TEE SHIRT AND A SHARPIE MARKER BY NOON TOMORROW OR SIMPLY CALL SOMEONE WHO GIVES A SHIRT.


Offline rusty

  • Sr. Member
  • ****
  • Posts: 476
Re: INK SUITABLE FOR CERAMIC FIRING
« Reply #1 on: December 20, 2017, 09:27:16 AM »
yeah, Nazdar would have the ADE series and you need a ceramic catalyst. I haver been trying to get into this but haven't had time.

He is probably referring to water slide decals. The only ink company I can think of off the top of my head is ferro, I'll pull out a post later today.


Offline Bearded Lady

  • Verified/Junior
  • **
  • Posts: 49
Re: INK SUITABLE FOR CERAMIC FIRING
« Reply #2 on: December 20, 2017, 09:29:54 AM »
I have some ceramics friends that use an inkjet decal that works with the glazing and firing process but I know there are also glazing mediums that can be screen printed onto decals or directly onto ceramics.  I'd have them contact the folks at Armadillo Clay, they'll know what to use.  http://www.armadilloclay.com/

Offline mooseman

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2215
Re: INK SUITABLE FOR CERAMIC FIRING
« Reply #3 on: December 20, 2017, 09:38:21 AM »
Thanks Rusty and Bearded for your reply.  Your time and energy will help me help him and yes he did use the term water slide now that you mention it.
Please follow up if you can rusty with the other info you may have.
This guy was quite sincere and a real gentleman with your help we can assist him in advancing his vision of the arts.
Respectfully
mooseman
DUE TO CIRCUMSTANCES COMPLETELY WITHIN MY CONTROL YOU SHOULD GET YOUR OWN TEE SHIRT AND A SHARPIE MARKER BY NOON TOMORROW OR SIMPLY CALL SOMEONE WHO GIVES A SHIRT.

Offline rusty

  • Sr. Member
  • ****
  • Posts: 476
Re: INK SUITABLE FOR CERAMIC FIRING
« Reply #4 on: December 20, 2017, 10:15:58 AM »
He can also get decals made here:  http://www.beldecal.com
though I have never used them and cannot attest to the quality.

Offline Sbrem

  • Ludicrous Speed Member
  • *******
  • Posts: 6035
Re: INK SUITABLE FOR CERAMIC FIRING
« Reply #5 on: December 20, 2017, 10:23:22 AM »
In our early days, when we would print most anything, we used NazDar Baking Epoxy on ceramic, rock solid... not sure about transfers though, haven't investigated, but I'll bet NazDar will have the answer for you.

Steve
I made a mistake once; I thought I was wrong about something; I wasn't

Offline medium

  • Verified/Junior
  • **
  • Posts: 29
Re: INK SUITABLE FOR CERAMIC FIRING
« Reply #6 on: December 21, 2017, 03:20:14 PM »
Heyo,

I actually researched this a little while ago.

From what I gather an ink system that prints a ceramic type transfer that is printed on a transfer paper of sorts. I believe they can be stored in that state. The sheet is soaked and positioned on a ceramic mug, plate etc and then fired in a kiln to set!

Here’s the link:

www.uwe.ac.uk/sca/research/cfpr/research/traditionalprint/Waterbased%20screenprintinghow%20to.pdf


Sent from my iPhone using Tapatalk

Offline royster13

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1975
Re: INK SUITABLE FOR CERAMIC FIRING
« Reply #7 on: December 21, 2017, 04:41:50 PM »
http://www.sgcd.org/

Might be able to find some links here....

Offline mooseman

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2215
Re: INK SUITABLE FOR CERAMIC FIRING
« Reply #8 on: December 21, 2017, 06:00:16 PM »
Youz Guyz is the bestas....thank you for the tips i will pass on the wisdom  THANK YOU
mooseman
DUE TO CIRCUMSTANCES COMPLETELY WITHIN MY CONTROL YOU SHOULD GET YOUR OWN TEE SHIRT AND A SHARPIE MARKER BY NOON TOMORROW OR SIMPLY CALL SOMEONE WHO GIVES A SHIRT.