Author Topic: rare discharge job help  (Read 1148 times)

Offline Sbrem

  • Ludicrous Speed Member
  • *******
  • Posts: 6035
rare discharge job help
« on: January 17, 2018, 10:46:49 AM »
We're printing 400 pieces with Union DSSP1003 White, and have a second color, Cool Gray 8; do we simply get some Aerotex Black and add it? Or is that just too easy? Also we'll need a retarder, but I see at their site that they have no actual instruction on it's use... any advice is appreciated.

Steve
I made a mistake once; I thought I was wrong about something; I wasn't


Offline Admiral

  • Hero Member
  • *****
  • Posts: 855
Re: rare discharge job help
« Reply #1 on: January 17, 2018, 10:56:07 AM »
Not sure what kind of grey you are going for but I would base it down a lot as well.  If Cool grey - they tend to use a very small amount of fluorescent yellow and marine blue it looks like too.

Offline RICK STEFANICK

  • Gonzo Member
  • ******
  • Posts: 1925
  • INDUSTRY CONSULTANT-OPERATIONS SPECIALIST
Re: rare discharge job help
« Reply #2 on: January 18, 2018, 12:26:52 PM »
We're printing 400 pieces with Union DSSP1003 White, and have a second color, Cool Gray 8; do we simply get some Aerotex Black and add it? Or is that just too easy? Also we'll need a retarder, but I see at their site that they have no actual instruction on it's use... any advice is appreciated.

Steve

That would work. add the black. it really is that easy
Specializing in shop assessment's, flow and efficiency

Offline Sbrem

  • Ludicrous Speed Member
  • *******
  • Posts: 6035
Re: rare discharge job help
« Reply #3 on: January 18, 2018, 01:05:38 PM »
Thanks all, I got a reply from the Rutland rep (they're all PolyOne now it seems) and he stated pretty much the same. I assumed, but that usually ends up biting me you know where...

Steve
I made a mistake once; I thought I was wrong about something; I wasn't

Offline bryanprints

  • Verified/Junior
  • **
  • Posts: 25
Re: rare discharge job help
« Reply #4 on: January 25, 2018, 10:43:04 PM »
That's awesome to know.  I didn't think there was any way that would work.