Author Topic: Automatic industrial print head cleaners  (Read 2009 times)

Offline ffokazak

  • Sr. Member
  • ****
  • Posts: 403
Automatic industrial print head cleaners
« on: January 30, 2018, 12:34:07 PM »
Anyone have any Experience  with these?

For the cost of 1.5 Gen 4 heads, I can get a recovery system...

Just thinking ahead, as we now have 9 gen 4 heads in the shop....

If these are effective it may be worth it...

Anyone have experience?



Offline blue moon

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 6355
Re: Automatic industrial print head cleaners
« Reply #1 on: January 30, 2018, 03:58:56 PM »
can you give us a link to the product? 'not really sure what you are talking about. . .

pierre
Yes, we've won our share of awards, and yes, I've tested stuff and read the scientific papers, but ultimately take everything I say with more than just a grain of salt! So if you are looking for trouble, just do as I say or even better, do something I said years ago!

Offline Jepaul

  • Full Member
  • ***
  • Posts: 126
  • www.youngonecorporation.com
Re: Automatic industrial print head cleaners
« Reply #2 on: January 30, 2018, 04:04:20 PM »
This works very well.  ROQ uses this to recondition print heads from the Hybrid Fuji Starfire heads. 

https://www.printheaddoctor.com/

Offline ffokazak

  • Sr. Member
  • ****
  • Posts: 403
Re: Automatic industrial print head cleaners
« Reply #3 on: January 30, 2018, 05:13:43 PM »
Yep the one above is what I'm talking about...

Looks like it would be worth it.

Obviously not if you have a head strike, but if its just cogged nozzles, you may be able to revive a pricey head


Offline ffokazak

  • Sr. Member
  • ****
  • Posts: 403
Re: Automatic industrial print head cleaners
« Reply #4 on: January 30, 2018, 05:38:05 PM »
I just bought one, I will definitely update you guys with the experience, and maybe even setup a service if anyone needs heads cleaned!

Cheers!


Offline blue moon

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 6355
Re: Automatic industrial print head cleaners
« Reply #5 on: January 30, 2018, 05:44:27 PM »
I just bought one, I will definitely update you guys with the experience, and maybe even setup a service if anyone needs heads cleaned!

Cheers!

That sounds like a pretty good idea! Which heads does it support?

pierre
Yes, we've won our share of awards, and yes, I've tested stuff and read the scientific papers, but ultimately take everything I say with more than just a grain of salt! So if you are looking for trouble, just do as I say or even better, do something I said years ago!

Offline ffokazak

  • Sr. Member
  • ****
  • Posts: 403
Re: Automatic industrial print head cleaners
« Reply #6 on: January 30, 2018, 06:25:23 PM »
A list so vast, it makes me realize I know very little about industrial print heads!


Offline Alex M

  • !!!
  • Sr. Member
  • ****
  • Posts: 257
Re: Automatic industrial print head cleaners
« Reply #7 on: January 30, 2018, 10:31:12 PM »
Be VERY careful!!!
The solvents they send with those units are strong! A couple of them delaminated some of the gen 4 heads we cleaned. Just make sure you pay close attention to their instructions.


Sent from my iPhone using Tapatalk
Alex Mammoser
Director of Sales
Easiway Systems
Mobile: +1 630 220 6588
alex@easiway.com