Author Topic: Lawson Expo light LED conversion  (Read 689 times)

Offline travis.hoyme

  • Verified/Junior
  • **
  • Posts: 60
Lawson Expo light LED conversion
« on: February 07, 2018, 10:36:50 PM »
Does anyone know the steps that would need to be taken to convert this fluorescent unit to an led unit?


Sent from my iPhone using Tapatalk


Offline blue moon

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 6355
Re: Lawson Expo light LED conversion
« Reply #1 on: February 08, 2018, 08:54:23 AM »
forgot to mention in the PM, Vastex used to sell LED strips for converting the fluorescent units. Look them up and see if they still carry them.

pierre
Yes, we've won our share of awards, and yes, I've tested stuff and read the scientific papers, but ultimately take everything I say with more than just a grain of salt! So if you are looking for trouble, just do as I say or even better, do something I said years ago!

Offline Maxie

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1312
Re: Lawson Expo light LED conversion
« Reply #2 on: February 08, 2018, 11:24:57 AM »
I’m not sure  what the Lawson looks like but I took the fluorescents out of a table I have, also remove the bottom of the box and get a LED from Saati that I put on the floor under the table.
Get great results and the small LED Saati sell is not expensive.
Maxie Garb.
T Max Designs.
Silk Screen Printers
www.tmax.co.il

Offline Pangea

  • !!!
  • Full Member
  • ***
  • Posts: 228
  • Jack of all trades, master of none.
Re: Lawson Expo light LED conversion
« Reply #3 on: February 08, 2018, 07:32:22 PM »
$100 in 395nm UV LED strips and a cheap transformer. Check out my LED exposure build on the DIY section and let me know if you have any questions.