Author Topic: Can`t get a good green in Separation Studio  (Read 1637 times)

Offline Rockers

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2050
Can`t get a good green in Separation Studio
« on: March 02, 2018, 03:04:44 AM »
Please check the attached artwork.
After bringing it into Separation Studio all the green is gone. The green channel contains no data. I can pull the Saturation adjuster all the way up to +100 and it won`t make a change. Now in UltraSeps it`s the total opposite, green overload.
Now what are my options here to get a better result in Separation Studio.
And how would you sep this?
My client insists on 8 colors, but Sep.Studio gives me a maximum of 6 to work with if I generate a brown channel.
Am I`m doomed?


Offline Sbrem

  • Ludicrous Speed Member
  • *******
  • Posts: 6035
Re: Can`t get a good green in Separation Studio
« Reply #1 on: March 02, 2018, 07:30:28 AM »
This might be a good image for index separations, plus a halftone where it fades off, index breaks down I think at fading to nothing, a halftone there would be more smooth.

Steve
I made a mistake once; I thought I was wrong about something; I wasn't