Author Topic: Would anyone be interested in this inverted pre-reg kit?  (Read 827 times)

Offline paradoxsc

  • Verified/Junior
  • **
  • Posts: 62
Would anyone be interested in this inverted pre-reg kit?
« on: March 09, 2018, 02:08:43 PM »
I made one and posted the instructions here:
http://www.theshirtboard.com/index.php/topic,20748.0.html

I'm trying to get a feel for who might want the pre-cut aluminum pieces as a kit so they can do it themselves. I figure $600 for both jigs and the stop blocks is fair. The rest you can do on your own fairly cheaply.

I'll pre-tap(thread) the holes for another $100 (tap kit and oil is cheaper)

If I can get at least 5 people to commit, I'll make them.
« Last Edit: March 09, 2018, 02:17:32 PM by paradoxsc »


Offline paradoxsc

  • Verified/Junior
  • **
  • Posts: 62
Re: Would anyone be interested in this inverted pre-reg kit?
« Reply #1 on: March 09, 2018, 02:18:33 PM »
I'll also do the pallet arm stop block for an extra $50