Author Topic: Ball Cap Screens  (Read 1595 times)

Offline StephStew23

  • Newbie
  • *
  • Posts: 6
Ball Cap Screens
« on: April 25, 2018, 02:34:46 PM »
Does anyone know where to find the screens for printing on hats? The screens are about 4x8. Photo attached.
Stephanie Stewart
One Stroke Inks
sstewart@osinks.com
800.942.4447


Offline nascarstan

  • Newbie
  • *
  • Posts: 6
Re: Ball Cap Screens
« Reply #1 on: April 25, 2018, 02:44:05 PM »
Workhorse products in Phoenix

Offline StephStew23

  • Newbie
  • *
  • Posts: 6
Re: Ball Cap Screens
« Reply #2 on: April 25, 2018, 03:13:44 PM »
Thank you! I will give them a call.  ;)
Stephanie Stewart
One Stroke Inks
sstewart@osinks.com
800.942.4447

Offline Sbrem

  • Ludicrous Speed Member
  • *******
  • Posts: 6035
Re: Ball Cap Screens
« Reply #3 on: August 23, 2018, 09:04:11 AM »
We had one of those type of hat printers years ago, and they worked well, though a pain to make, stretch, and seal, they worked. However, is you're printing on 5 panel hats, check out the Livingston Hat Champ, it will let you print flat, and no need for special screens.

Steve
I made a mistake once; I thought I was wrong about something; I wasn't

Offline 3Deep

  • !!!
  • Ludicrous Speed Member
  • *******
  • Posts: 5243
Re: Ball Cap Screens
« Reply #4 on: August 23, 2018, 10:12:26 AM »
We have one of those workhorse cap attachments for our press, have not use it in years, but it did work great whenever we needed to print caps, even have an attachment for six panel caps.
Life is like Kool-Aid, gotta add sugar/hardwork to make it sweet!!