Author Topic: Epson P800 nightmare  (Read 1737 times)

Offline mimosatexas

  • !!!
  • Gonzo Member
  • ******
  • Posts: 4221
  • contributor
Re: Epson P800 nightmare
« Reply #15 on: May 21, 2018, 10:24:28 AM »
You'll have a hell of a time getting the 9600 to print with anything past windows 7, just FYI.  I went down that road a while back...wasn't fun.  Ended up getting a 9800 for $500.


Offline Cole

  • Full Member
  • ***
  • Posts: 125
Re: Epson P800 nightmare
« Reply #16 on: May 21, 2018, 11:56:12 AM »
You'll have a hell of a time getting the 9600 to print with anything past windows 7, just FYI.  I went down that road a while back...wasn't fun.  Ended up getting a 9800 for $500.

I'm running Mac OS 10.13

Hopefully it will work with that. Epson has the drivers available for this version of OS and Accurip shows in its configuration menu that it's compatible with the 9600. I haven't hooked it up yet because I'm in the middle of moving shops, but I have my fingers crossed that it will work. I'd rather deal with issues on press all day than deal with printer problems for an hour. Today is the day I start saving for CTS lol

Offline 3Deep

  • !!!
  • Ludicrous Speed Member
  • *******
  • Posts: 5244
Re: Epson P800 nightmare
« Reply #17 on: May 21, 2018, 03:03:29 PM »
I'm thinking some screenprint supply companies might have went in and both butt loads of the 1430 so they could bundle it with there rips etc.  Lucky that my 3000 is still printing good film with the 1430 sitting right beside it printing film as well, still using an old XP system with them as the newer system's are a pain to deal with.
Life is like Kool-Aid, gotta add sugar/hardwork to make it sweet!!