« previous next »
Pages: [1]   Go Down

Author Topic: Silver reflective heat seal  (Read 1094 times)

Offline mooseman

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2215
Silver reflective heat seal
« on: August 31, 2018, 11:21:43 AM »
Couple questions please
Looking to apply silver reflective to common tee shirts. No ASTM or ANSI standards involved but is for a fire dept.
will cut the designs on Roland 24 in.
What brand material can you recommend example Stahls  or Siser  or other ?.
One of the designs will be a typical left chest Maltese cross type other large back text.
I am ok with the cutter I think just looking for material experience especially with some finer detail images
Thanks
mooseman
Logged
DUE TO CIRCUMSTANCES COMPLETELY WITHIN MY CONTROL YOU SHOULD GET YOUR OWN TEE SHIRT AND A SHARPIE MARKER BY NOON TOMORROW OR SIMPLY CALL SOMEONE WHO GIVES A SHIRT.

Offline cbjamel

  • Gonzo Member
  • ******
  • Posts: 1088
Re: Silver reflective heat seal
« Reply #1 on: August 31, 2018, 12:07:19 PM »
Stahl 3m reflective is best durability, expensive but best. I have tried both the 3m and stahls brand, 3m best.

Shane
Logged

Offline blue moon

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 6356
Re: Silver reflective heat seal
« Reply #2 on: August 31, 2018, 01:45:53 PM »
you can also order precut from Stahl's. More expensive, but easier. . .

pierre
Logged
Yes, we've won our share of awards, and yes, I've tested stuff and read the scientific papers, but ultimately take everything I say with more than just a grain of salt! So if you are looking for trouble, just do as I say or even better, do something I said years ago!

Offline Sbrem

  • Ludicrous Speed Member
  • *******
  • Posts: 6041
Re: Silver reflective heat seal
« Reply #3 on: August 31, 2018, 04:33:02 PM »
We've tried a couple, difficult to weed, you really have to get the knife just right and weed slowly... Sister's was pretty good.

Steve
Logged
I made a mistake once; I thought I was wrong about something; I wasn't

Offline mooseman

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2215
Re: Silver reflective heat seal
« Reply #4 on: August 31, 2018, 08:02:27 PM »
Thanks all for your reflection on my inquiry......you guys is da best !
Mooseman
Logged
DUE TO CIRCUMSTANCES COMPLETELY WITHIN MY CONTROL YOU SHOULD GET YOUR OWN TEE SHIRT AND A SHARPIE MARKER BY NOON TOMORROW OR SIMPLY CALL SOMEONE WHO GIVES A SHIRT.

Offline Croft

  • Hero Member
  • *****
  • Posts: 875
Re: Silver reflective heat seal
« Reply #5 on: September 04, 2018, 02:24:02 PM »
really liking the SISER reflective cuts nice doesn't destroy blades and weeds well nothing like the 3M material, much easier to use
Logged

Offline mk162

  • Ludicrous Speed Member
  • *******
  • Posts: 7790
Re: Silver reflective heat seal
« Reply #6 on: September 04, 2018, 03:26:12 PM »
I use Chemica Hotmark Reflex.  I LOVE IT.  Chemica just put a warehouse in the metro Atlanta area, and their cad-cut vinyls(or polyurethane) are fantastic.
Logged

Offline 3Deep

  • !!!
  • Ludicrous Speed Member
  • *******
  • Posts: 5255
Re: Silver reflective heat seal
« Reply #7 on: September 04, 2018, 04:03:40 PM »
Brad you're lucky dog everything right there at your fingertips, we have a next level warehouse very close by but can't get anything from them thus far.
Logged
Life is like Kool-Aid, gotta add sugar/hardwork to make it sweet!!
Pages: [1]   Go Up
« previous next »