Author Topic: 600 Denier Totes Printing  (Read 620 times)

Offline Logoman

  • Sr. Member
  • ****
  • Posts: 394
  • Life is what happens while your making other plans
600 Denier Totes Printing
« on: September 16, 2018, 11:05:03 AM »
How would you print this, what type of ink, what temp ect? One color white print


Offline Frog

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 13945
  • Docendo discimus
Re: 600 Denier Totes Printing
« Reply #1 on: September 16, 2018, 11:47:59 AM »
What are they made of?
Denier is a unit of measurement that is used to determine the fiber thickness of individual threads or filaments used in the creation of textiles and fabrics. Fabrics with a high denier count tend to be thick, sturdy, and durable. Fabrics with a low denier count tend to be sheer, soft, and silky.

Totes are usually nylon or polyester. If nylon, the addition of Nylobond or similar adhesive/catalyst would be suggested, if Polyester, (unless white or light totes with a black print), a bleed resistant ink. The Nylobond allows for lower cure temps with full cure occurring later due to the catalyst. With Poly, lower temps are always in order to reduce bleeding, so low temp inks or additives are always helpful.
As always, test a piece through the tunnel first.
« Last Edit: September 16, 2018, 11:50:58 AM by Frog »
That rug really tied the room together, did it not?

Offline Homer

  • !!!
  • Gonzo Member
  • ******
  • Posts: 3157
Re: 600 Denier Totes Printing
« Reply #2 on: September 16, 2018, 12:50:57 PM »
nylobond and low temp....easiest way for us.
...keep doing what you're doing, you'll only get what you've got...

Offline Logoman

  • Sr. Member
  • ****
  • Posts: 394
  • Life is what happens while your making other plans
Re: 600 Denier Totes Printing
« Reply #3 on: September 16, 2018, 10:26:37 PM »
Polyester