Author Topic: Laser Alignment system (King Screen's Design)  (Read 1204 times)

Offline im_mcguire

  • !!!
  • Hero Member
  • *****
  • Posts: 716
Laser Alignment system (King Screen's Design)
« on: September 18, 2018, 04:24:12 PM »
Hey guys.  I bought a laser alignment system from King Screen, and have never used it.  Im looking to part with it.

Looking for $100 shipped
PM me if you are interested.
Thanks!


Offline im_mcguire

  • !!!
  • Hero Member
  • *****
  • Posts: 716
Re: Laser Alignment system (King Screen's Design)
« Reply #1 on: September 19, 2018, 02:46:54 PM »
Here are some photos, a couple DM's but nothing sold as of yet.

Offline Atownsend

  • !!!
  • Sr. Member
  • ****
  • Posts: 388
Re: Laser Alignment system (King Screen's Design)
« Reply #2 on: September 19, 2018, 03:09:05 PM »
I got the same one! That thing rules!! It has saved me hundreds of dollars in youth medium sweatshirts already. Solid unit. Can't believe you'd want to get rid of it.

Offline im_mcguire

  • !!!
  • Hero Member
  • *****
  • Posts: 716
Re: Laser Alignment system (King Screen's Design)
« Reply #3 on: September 19, 2018, 03:40:05 PM »
I got the same one! That thing rules!! It has saved me hundreds of dollars in youth medium sweatshirts already. Solid unit. Can't believe you'd want to get rid of it.
Our shop is so bright.  We got new lighting that is overkill. All LED tubes and where we would mount this, it shines so bright that we cant see the lasers.

I wish we could adjust the lighting, but Im fine without it for now.

Offline Atownsend

  • !!!
  • Sr. Member
  • ****
  • Posts: 388
Re: Laser Alignment system (King Screen's Design)
« Reply #4 on: September 19, 2018, 04:07:34 PM »
Thats kind of nice actually. We need more light in here bad. I have been thinking about converting our fluros to LED but lack the ambition to change the ballasts out.

Are the LEDs brighter than fluorescents or you just have a lot of them?


Offline mk162

  • Ludicrous Speed Member
  • *******
  • Posts: 7781
Re: Laser Alignment system (King Screen's Design)
« Reply #5 on: September 19, 2018, 04:10:40 PM »
The ballasts are pretty easy to wire around.  Some bulbs can run with them...but I think that's dumb because they use power and run hot as hell.  And they'll fail eventually anyway.

The bulbs are that much brighter...and they use 1/2 the power, and run cooler.  It's a no brainer to swap them.  It just takes time and the desire to do it.

We've changed all of them here.  It's made a big difference in the power bill.

Offline im_mcguire

  • !!!
  • Hero Member
  • *****
  • Posts: 716
Re: Laser Alignment system (King Screen's Design)
« Reply #6 on: September 19, 2018, 04:59:25 PM »
Thats kind of nice actually. We need more light in here bad. I have been thinking about converting our fluros to LED but lack the ambition to change the ballasts out.

Are the LEDs brighter than fluorescents or you just have a lot of them?
The building we rent the landlord opted for us to be a part of the first wave of the changeover to LED with our Utilites.

We scheduled it for when we installed our press, and man they are way brighter than the flo tubes.  Nice cool white light.

Offline im_mcguire

  • !!!
  • Hero Member
  • *****
  • Posts: 716
Re: Laser Alignment system (King Screen's Design)
« Reply #7 on: September 20, 2018, 03:23:17 PM »
THIS IS NOW SOLD!

Offline ffokazak

  • Sr. Member
  • ****
  • Posts: 403
Re: Laser Alignment system (King Screen's Design)
« Reply #8 on: September 20, 2018, 05:47:57 PM »
thanks!

looking forward to it!