Author Topic: replacing touch screen on diamond back  (Read 7250 times)

Online balloonguy

  • !!!
  • Hero Member
  • *****
  • Posts: 949
replacing touch screen on diamond back
« on: September 25, 2018, 09:36:35 AM »
I think I am going to have to change my screen. There are a couple of dead/dying spots. has anyone done this? Is it hard to do?
Thanks.
When you dig grave will you make it shallow so that I can feel the rain?


Offline Sbrem

  • Ludicrous Speed Member
  • *******
  • Posts: 6035
Re: replacing touch screen on diamond back
« Reply #1 on: September 25, 2018, 11:34:44 AM »
We had to do that to our MHM once, I would think you have to disassemble the case, and I'll bet it's replacement plugs in and you reassemble the case... but call M & R, they'll certainly tell you.

Steve
I made a mistake once; I thought I was wrong about something; I wasn't

Offline prozyan

  • Hero Member
  • *****
  • Posts: 507
Re: replacing touch screen on diamond back
« Reply #2 on: September 25, 2018, 09:26:14 PM »
Its actually really simple.  Open up the front panel, take pictures of where things are connected, disconnect the old one and connect the new one.

Took maybe 15 minutes when I replaced mine last summer.
If Barbie is so popular, why do you have to buy her friends?

Online balloonguy

  • !!!
  • Hero Member
  • *****
  • Posts: 949
Re: replacing touch screen on diamond back
« Reply #3 on: September 25, 2018, 10:24:34 PM »
Thanks. I am stressing a little...
 :(
When you dig grave will you make it shallow so that I can feel the rain?

Offline prozyan

  • Hero Member
  • *****
  • Posts: 507
Re: replacing touch screen on diamond back
« Reply #4 on: September 25, 2018, 11:04:42 PM »
Call M&R and they will walk you through it.  It is nerve wracking, but really easy.  You'll be fine.
If Barbie is so popular, why do you have to buy her friends?