Author Topic: can I use a color to under base my white  (Read 1310 times)

Online balloonguy

  • !!!
  • Hero Member
  • *****
  • Posts: 949
can I use a color to under base my white
« on: October 11, 2018, 09:35:12 AM »
Good morning,
I have a simple print. It is white and red ink on gray tees. Can I print the red ink, flash and print the white over red? I feel like that could save 1 screen. If I do a white base, flash then red and highlight white it is the same print time... but Can I save the screen? Any thoughts/experience is always appreciated.


When you dig grave will you make it shallow so that I can feel the rain?


Online mk162

  • Ludicrous Speed Member
  • *******
  • Posts: 7785
Re: can I use a color to under base my white
« Reply #1 on: October 11, 2018, 11:33:43 AM »
you can print a red that has enough coverage without an underbase?

you can print white over a color, just know that it will take on that shade, at least in my experience it has.

Offline Homer

  • !!!
  • Gonzo Member
  • ******
  • Posts: 3157
Re: can I use a color to under base my white
« Reply #2 on: October 11, 2018, 11:35:26 AM »
personally, I would P/F/P/F -> Red.... I don't really like stepping on red, it's always tacky...

as far as your question, try it and fill us in! I don't think it will work with these two colors but wtf do I know....
...keep doing what you're doing, you'll only get what you've got...

Online mk162

  • Ludicrous Speed Member
  • *******
  • Posts: 7785
Re: can I use a color to under base my white
« Reply #3 on: October 11, 2018, 11:39:48 AM »
The other option is to put a flash between the red and top white.  I agree, red can be sticky, especially with that much coverage.

Offline Sbrem

  • Ludicrous Speed Member
  • *******
  • Posts: 6035
Re: can I use a color to under base my white
« Reply #4 on: October 11, 2018, 12:50:19 PM »
We could, but we wouldn't. White base, flash, red or highlight white, flash, last color. It will look much better, if that counts...

Steve
I made a mistake once; I thought I was wrong about something; I wasn't

Offline im_mcguire

  • !!!
  • Hero Member
  • *****
  • Posts: 716
Re: can I use a color to under base my white
« Reply #5 on: October 11, 2018, 12:55:13 PM »
How many is it for?
Personally if it is less than 30 qty i p/f/p/f white, top red.

More than 30 qty:
white base
flash
top white
flash
Red

Offline Stinkhorn Press

  • !!!
  • Hero Member
  • *****
  • Posts: 545
Re: can I use a color to under base my white
« Reply #6 on: October 11, 2018, 01:24:28 PM »
i dunno why everyone puts top white last.
red with that coverage, yes can suck to print after. top white isn't nearly as bad to print after.
UB white Flash top white then red wow
leave a little gutter between top colors if you don't print/register super accurate.


Offline mooseman

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2215
Re: can I use a color to under base my white
« Reply #7 on: October 11, 2018, 11:45:37 PM »
my thought is white first down full under base for the red with a little choke with a 156 or 195mesh , flash it, hit the white again same screen, then drop a red one hit on the white use a 230 mesh and done.
works for us (most of the time) Just be sure you have a good EOM on the red 230 and don't overpower the print stroke.
mooseman
DUE TO CIRCUMSTANCES COMPLETELY WITHIN MY CONTROL YOU SHOULD GET YOUR OWN TEE SHIRT AND A SHARPIE MARKER BY NOON TOMORROW OR SIMPLY CALL SOMEONE WHO GIVES A SHIRT.

Online balloonguy

  • !!!
  • Hero Member
  • *****
  • Posts: 949
Re: can I use a color to under base my white
« Reply #8 on: October 18, 2018, 10:39:34 AM »
I did not try it. The shirt was charcoal so it was darker than expected and I am a little too busy to start testing right now. I will at some point take a stab at this though. White always looks pretty good over any printed color when I am printing my test tees while setting up. When I get around to it I will post.
I ended up printing white PFPF (same screen 2x around) and red on top. It was only 54 shirts. I have not yet decided where to draw the line for making 2 screens or 2 times around the press... This is right in the area though. I am thinking anything over 60 or maybe 70. I have to figure out if it takes longer to reclaim a screen than go around twice.
When you dig grave will you make it shallow so that I can feel the rain?

Online tonypep

  • Ludicrous Speed Member
  • *******
  • Posts: 5610
Re: can I use a color to under base my white
« Reply #9 on: October 18, 2018, 10:56:45 AM »
White over red will mostly turn  pink regardless of interdepdant variables IMO

Offline 3Deep

  • !!!
  • Ludicrous Speed Member
  • *******
  • Posts: 5243
Re: can I use a color to under base my white
« Reply #10 on: October 18, 2018, 01:22:51 PM »
Wouldn't print white over red either, don't know how many you have to print but I would roll around twice and print red last over a white base using two screens, but if you want speed 3 screens and be done with it. ;)
Life is like Kool-Aid, gotta add sugar/hardwork to make it sweet!!