« previous next »
Pages: [1]   Go Down

Author Topic: HotHead FlatIron  (Read 703 times)

Offline BP

  • Sr. Member
  • ****
  • Posts: 380
HotHead FlatIron
« on: November 27, 2018, 07:11:10 AM »
So I just got my flatiron up and running. We have ran and few jobs and it works great. But there is a little learning curve for sure. Any tips on temp etc. would be great.
Logged
SHIRT HAPPENS!

Offline IntegriTees

  • Full Member
  • ***
  • Posts: 178
Re: HotHead FlatIron
« Reply #1 on: November 27, 2018, 10:14:40 AM »
I believe 400 is max. we set ours at 350 and that does the job.
Logged

Offline im_mcguire

  • !!!
  • Hero Member
  • *****
  • Posts: 716
Re: HotHead FlatIron
« Reply #2 on: November 27, 2018, 01:01:54 PM »
Just curious:
Is there a way to hook one of these up to. Workhorse press?
Logged

Offline AAP

  • Newbie
  • *
  • Posts: 5
Re: HotHead FlatIron
« Reply #3 on: November 28, 2018, 10:46:07 AM »
When running jobs with the flat iron, what's your avg shirts per hour?
Logged

Offline ffokazak

  • Sr. Member
  • ****
  • Posts: 403
Re: HotHead FlatIron
« Reply #4 on: November 28, 2018, 12:50:39 PM »
Its independent of the press. It doesn't hook up to the control panel of a press or anything.

Its essentially a roller that heats up, from the control box which holds all of the controls.

Logged
Pages: [1]   Go Up
« previous next »