Author Topic: Off Center Cap Design  (Read 1208 times)

Offline StinkyDaddy

  • Full Member
  • ***
  • Posts: 164
Off Center Cap Design
« on: November 28, 2018, 11:17:53 AM »
I have a racing team looking to get their logo embroidered off center (to one side) on the front of the cap. The customer has seen it done, but I'm having trouble finding a contract embroiderer who does it. Any suggestions
Thanks,
Wm.


Offline dsh

  • Full Member
  • ***
  • Posts: 157
Re: Off Center Cap Design
« Reply #1 on: November 28, 2018, 12:17:11 PM »
It's not difficult.  The design might have to be shrunk, but it's easy enough.  It's hard to imagine why they wouldn't.

Online Frog

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 13945
  • Docendo discimus
Re: Off Center Cap Design
« Reply #2 on: November 28, 2018, 12:27:13 PM »
Hey Stinky, what exactly did they cite as the reason? Or was it merely that they had never been asked to before?
That rug really tied the room together, did it not?

Offline StinkyDaddy

  • Full Member
  • ***
  • Posts: 164
Re: Off Center Cap Design
« Reply #3 on: November 28, 2018, 12:34:29 PM »
It's a fairly complex design, they said they would have to shrink it down and it wouldn't stitch well. I don't do emb and don't really know the process so I'm trying to understand.

Online Frog

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 13945
  • Docendo discimus
Re: Off Center Cap Design
« Reply #4 on: November 28, 2018, 12:41:17 PM »
It's a fairly complex design, they said they would have to shrink it down and it wouldn't stitch well. I don't do emb and don't really know the process so I'm trying to understand.

Okay, it now sounds like position really has nothing to do with it. It's a size thing. Wouldn't work in the center either.
That rug really tied the room together, did it not?

Offline Sbrem

  • Ludicrous Speed Member
  • *******
  • Posts: 6035
Re: Off Center Cap Design
« Reply #5 on: November 28, 2018, 12:51:55 PM »
We have an order in house just like that, a reorder actually. It can be done if the art is right, meaning stitchable, but the limitations are what they are.

Steve
I made a mistake once; I thought I was wrong about something; I wasn't

Online Frog

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 13945
  • Docendo discimus
Re: Off Center Cap Design
« Reply #6 on: November 28, 2018, 01:01:31 PM »
I was just asked to do this as well (then the custie balked at a dozen hats costing $9-$11 each, saying she expected them to be half of that!)
That rug really tied the room together, did it not?

Offline screenxpress

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2422
Re: Off Center Cap Design
« Reply #7 on: November 28, 2018, 01:15:17 PM »
Tell her she can get half the order for that, lol.
Anything important is never left to the vote of the people. We only get to vote on some man; we never get to vote on what he is to do.  Will Rogers

Online Frog

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 13945
  • Docendo discimus
Re: Off Center Cap Design
« Reply #8 on: November 28, 2018, 01:29:38 PM »
That made me think of these old hats from the "Bay Bridge Series" before inter-league play was the norm.

That rug really tied the room together, did it not?

Offline mooseman

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2215
Re: Off Center Cap Design
« Reply #9 on: November 30, 2018, 08:33:55 AM »
Going to guess here but the comment you made "It's a fairly complex design, they said they would have to shrink it down and it wouldn't stitch well' tells me either the embroidery shop you contacted is new or quite experienced.
Complex designs on hats create a serious registration and repeatability issues.
The comment that the design has to be reduced in size further suggests added complexity and problems.
It would help to see the design but I would strongly suggest you resize it and get it digitized for cap work. The design for flats will not work well on caps simply due to the pathing and sequencing of the stitches. Additionally i would take a close look at the structure of the cap. Depending on how high and low the design will land on the cap the mechanics may simply be beyond a reasonable expectation.
Have you thought  about possibly getting a woven (no embroidered) patch of the design and heat pressing it on?
https://www.stadriemblems.com/products/woven-patches/
https://www.arrowemblems.com/aemdnn/Products/Patches/Woven

mooseman
DUE TO CIRCUMSTANCES COMPLETELY WITHIN MY CONTROL YOU SHOULD GET YOUR OWN TEE SHIRT AND A SHARPIE MARKER BY NOON TOMORROW OR SIMPLY CALL SOMEONE WHO GIVES A SHIRT.

Offline StinkyDaddy

  • Full Member
  • ***
  • Posts: 164
Re: Off Center Cap Design
« Reply #10 on: November 30, 2018, 09:30:09 AM »
Thanks!
I'm looking at those now and that may be the way to go.

Offline mk162

  • Ludicrous Speed Member
  • *******
  • Posts: 7785
Re: Off Center Cap Design
« Reply #11 on: November 30, 2018, 11:10:39 AM »
Your best bet may be a custom cap.  CapAmerica may be a good choice.

Offline presspressmerch

  • Verified/Junior
  • **
  • Posts: 65
Re: Off Center Cap Design
« Reply #12 on: November 30, 2018, 06:47:35 PM »
I would also suggest a patch of some kind, much better look. Quantity might be an issue.


Sent from my iPhone using Tapatalk