Author Topic: 2 tables out of register  (Read 654 times)

Online balloonguy

  • !!!
  • Hero Member
  • *****
  • Posts: 949
2 tables out of register
« on: January 15, 2019, 06:33:24 PM »
I have a 2 tables on a 6 color/8 station diamondback that are out of register. Can anyone tell me what causes that? Shouldn't the table be in the same position (relative) to each print head? It is really weird. 6 of the 8 prints are perfect and 2 are really out of whack. I checked to make sure that the screens are tight. I made sure the tables are locked in place... I am getting pretty frustrated. I just started today!
Thanks for any ideas/suggestions.
When you dig grave will you make it shallow so that I can feel the rain?


Offline Nation03

  • Gonzo Member
  • ******
  • Posts: 1244
  • The Dude abides.
Re: 2 tables out of register
« Reply #1 on: January 16, 2019, 08:01:38 AM »
Possibly loose print arms or pallet brackets? Was there less tack on those particular pallets? I had the same issue on my old Freedom and it drove me insane. I never found a solution either.

Online cleveprint

  • !!!
  • Sr. Member
  • ****
  • Posts: 439
Re: 2 tables out of register
« Reply #2 on: January 16, 2019, 09:27:50 AM »
try the pallet arms. we have two diamondbacks and this has happened to us before. both times it was the bolt that holds the pallet arm to the carousel came loose.