Author Topic: ADE mesh guideleines  (Read 486 times)

Offline Pangea

  • !!!
  • Full Member
  • ***
  • Posts: 151
  • Jack of all trades, master of none.
ADE mesh guideleines
« on: February 27, 2019, 01:36:06 PM »
Anyone have any general mesh guidelines/experience for printing Nazdar ADE on glassware? My first print of white through 305 gave less than stellar (but still passable) results so I'm going to try out a 200. Was curious about other colors and metallics.


Offline mimosatexas

  • !!!
  • Gonzo Member
  • ******
  • Posts: 4170
  • contributor
Re: ADE mesh guideleines
« Reply #1 on: February 27, 2019, 02:10:58 PM »
i think i did 180S last time

Offline Frog

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 12563
  • Docendo discimus
Re: ADE mesh guideleines
« Reply #2 on: February 27, 2019, 02:40:56 PM »
Official mesh guidleines for ADE Epoxy Series
Mesh
200-305 tpi (78-120 tpcm) monofilament polyester mesh or stainless steel mesh for most applications.


I'd suggest contacting tech at NazDar to see if they have recommendations as to whether some colors affect which end of the scale if at all.
"It's crackers to slip a rozzer the dropsy in snide"

Offline Doug B

  • !!!
  • Hero Member
  • *****
  • Posts: 523
Re: ADE mesh guideleines
« Reply #3 on: February 27, 2019, 02:45:53 PM »
  I have used 230 for epoxy before with good results. I wouldn't even
try 305 unless it was very fine detail.
« Last Edit: February 27, 2019, 03:08:19 PM by Doug B »

Offline Sbrem

  • Ludicrous Speed Member
  • *******
  • Posts: 5189
Re: ADE mesh guideleines
« Reply #4 on: February 27, 2019, 05:01:22 PM »
it's been a few years, but we ran 200 - 230 for meshes on metal and ceramic parts.

Steve
I made a mistake once; I thought I was wrong about something; I wasn't

Offline BP

  • Full Member
  • ***
  • Posts: 230
SHIRT HAPPENS!