Author Topic: Deleating a design mid sew  (Read 755 times)

Offline rmonks

  • !!!
  • Sr. Member
  • ****
  • Posts: 457
Deleating a design mid sew
« on: January 29, 2019, 04:31:16 PM »
I am new to embroidery I have a SWF 1501 single head . I was sewing a design and the needle broke and screwed the thread up. I had to remove the hoop and I want to know if I can cancel what i was sewing even though it did not finish, or do i have to let the machine finish sewing the design.


Offline Printficient

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1222
Re: Deleating a design mid sew
« Reply #1 on: January 29, 2019, 04:42:50 PM »
You should be able to back up the needle a little bit and continue
Shop-Doc "I make house calls"
Procedure Video Training
Press Inspections
Tips and Tricks Training
404-895-1796 Sonny McDonald

Offline cbjamel

  • Gonzo Member
  • ******
  • Posts: 1088
Re: Deleating a design mid sew
« Reply #2 on: January 29, 2019, 06:31:33 PM »
to go back to original start place and start over push and hold set key till it beeps.
shane

Sent from my SAMSUNG-SM-G890A using Tapatalk


Offline rmonks

  • !!!
  • Sr. Member
  • ****
  • Posts: 457
Re: Deleating a design mid sew
« Reply #3 on: January 29, 2019, 06:40:29 PM »
Thanks CB Holding the set button till it beeb's WORKED.

Offline cbjamel

  • Gonzo Member
  • ******
  • Posts: 1088
Re: Deleating a design mid sew
« Reply #4 on: January 29, 2019, 08:07:37 PM »
Yep I have swf so i understand.
Shane

Sent from my SAMSUNG-SM-G890A using Tapatalk