Author Topic: tajima 6 head. I’m looking for a service tech. Anybody have any recommendations  (Read 1784 times)

Offline im_mcguire

  • !!!
  • Hero Member
  • *****
  • Posts: 716
We are looking at a used 6 head Tajima. But we would like to talk to someone who knows these machines. We are in Northern California, if someone here could help.

Thank you!


Offline mooseman

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2215
Check out yahoo groups there is a group called tajima users.
Someone there will have a recommendatio
Mooseman
DUE TO CIRCUMSTANCES COMPLETELY WITHIN MY CONTROL YOU SHOULD GET YOUR OWN TEE SHIRT AND A SHARPIE MARKER BY NOON TOMORROW OR SIMPLY CALL SOMEONE WHO GIVES A SHIRT.

Offline TheGhost

  • Verified/Junior
  • **
  • Posts: 81
We use Hirsch since that's who we got the machines from.

Jose is a good guy, not sure if he goes that far for service though.

I think Mooseman is sending you on the right track. Hirsch surely takes some cash for themselves scheduling service, but if all else fails you can try calling them.

Offline Admiral

  • Hero Member
  • *****
  • Posts: 855
Hirsch is terrible to have to go through.  A lot of delays, slow responses through them.  Unfortunately I only know of one tech in my area and he isn't the most reliable and while I do schedule him for yearly maintenance, I don't think he is at all as thorough as other techs would be.

I am in SE Michigan though so tech(s) will be a completely different story in your area.

Offline gotshirtz001

  • Full Member
  • ***
  • Posts: 139
I’ve got a good guy in Berkeley


Sent from my iPhone using Tapatalk
I'm flexible until I'm not

Offline TheGhost

  • Verified/Junior
  • **
  • Posts: 81
Yes Hirsch sucks. Been waiting all week for them to call me back to schedule a tech.

Offline DCSP John

  • Sr. Member
  • ****
  • Posts: 340
We have a two month old TMAR 6..
Worked great for the first 1.5 months.
Then, slowly - three of the heads went out of alignment.
God only knows how. No hoop hits. We have been extremely
careful with the machine.. Just constant needle breaks. Its crazy.
Hirsch told us no tech available for three weeks. Apparently only
a handful of techs available to work to work on the TMAR.
Does not bode well....

- John

Offline gotshirtz001

  • Full Member
  • ***
  • Posts: 139
For those that are unaware, Kenny Lightfoot (emb tech) passed away suddenly this past June. Great guy and a tragic loss. RIP buddy


Sent from my iPhone using Tapatalk
« Last Edit: August 26, 2019, 09:50:27 AM by gotshirtz001 »
I'm flexible until I'm not

Offline GKitson

  • Hero Member
  • *****
  • Posts: 720
  • Just another t-shirt guy
East of the Mississippi River Bill Garvin and BG Tech services.  FIrst Class Service.

813-373-3331

 
Greg Kitson
Mind's Eye Graphics Inc.
260-724-2050

Offline RICK STEFANICK

  • Gonzo Member
  • ******
  • Posts: 1925
  • INDUSTRY CONSULTANT-OPERATIONS SPECIALIST
Yes Hirsch sucks. Been waiting all week for them to call me back to schedule a tech.

Why wait all week call back every 2 hours until you get your answer. Don't accept sub standard service.
Specializing in shop assessment's, flow and efficiency

Offline T Shirt Farmer

  • Hero Member
  • *****
  • Posts: 832
For those that are unaware, Kenny Lightfoot (emb tech) passed away suddenly this past June. Great guy and a tragic loss. RIP buddy


Sent from my iPhone using Tapatalk

Ken was a Great Man so giving, his passing hit me hard, he was only 58.
Robert
allpremiums.com
Your Source for Decorated Apparel.

Offline SteveS

  • Full Member
  • ***
  • Posts: 146
We're fortunate here in Houston to have Robert Parker. He's a contract tech for Hirsch and also does his own thing. Awesome tech and very familiar with the intricacies of the TMARK and all previous models. They are very specialized machines and require a different installation setup tolerances than the previous models. We had some of the same issues originally with the original installation of our TMARK Type II, but once the properly trained technicians got out and set the machine up tight, it's been butter ever since. I know Robert mainly works in the Houston and surrounding areas but he's a great guy and does great work.

If anyone needs his contact information, hit me up and I will provide it for you.

And I have to take issue with the comments that Hirsch support is sub-par. They have always been quick and helpful to us. Just keep in mind how many calls they get because of all the machines in the field. They have a call queue and sometimes they are slammed. Who can say they don't have issues like that sometimes.

I might also add that anyone that has more than 2 machines in their shop ought to become very familiar with fixing some things themselves and being a bit mechanically inclined to do so. Hirsch is always quick to provide white papers to guide even the most un-mechanical person to fix things like stuck knives, presser foot connecting studs and reciprocator replacements. They aren't that hard to do. Heck, even my wife can do some of these things now when the need arises.

Offline gotshirtz001

  • Full Member
  • ***
  • Posts: 139
For those that are unaware, Kenny Lightfoot (emb tech) passed away suddenly this past June. Great guy and a tragic loss. RIP buddy


Sent from my iPhone using Tapatalk

Ken was a Great Man so giving, his passing hit me hard, he was only 58.
Great guy. Way too young.


Sent from my iPhone using Tapatalk
I'm flexible until I'm not