Author Topic: 10 minute tri lock set up  (Read 1106 times)

Offline DannyGruninger

  • Gonzo Member
  • ******
  • Posts: 1178
Re: 10 minute tri lock set up
« Reply #15 on: March 13, 2019, 03:03:46 PM »
Our inventory is over 90% s mesh
Danny Gruninger
Denver Print House / Lakewood Colorado
https://www.instagram.com/denverprinthouse


Offline RICK STEFANICK

  • Gonzo Member
  • ******
  • Posts: 1612
Re: 10 minute tri lock set up
« Reply #16 on: March 14, 2019, 10:28:55 AM »
Thank you for the responses. We are re- training all our teams to use the tri-lock on ALL set ups and am going to show the videos at the start of the sessions. Does anyone have a written training manual that you custom wrote specificaly for employee tri-lock training other than the published M/R one. I can use some info from that but need one customized more for specific team training. I am working on one now so if there are no responses I will have one complete by the end of next week i can share. please email me in addition to posting if you have anything. thanks in advance 
[email protected]

Offline ZooCity

  • Gonzo Member
  • ******
  • Posts: 4775
Re: 10 minute tri lock set up
« Reply #17 on: March 22, 2019, 03:29:58 PM »
Hey I got a follow up-

Does anyone know of some vids showing skilled load/unloaders and how the support crew works around them? 

Once you get setup improved this seems to be the next major challenge.

Online tonypep

  • Gonzo Member
  • ******
  • Posts: 4959
Re: 10 minute tri lock set up
« Reply #18 on: March 22, 2019, 05:44:21 PM »
It is all in the pre-op/post op. All said, we do not live in a perfect world and it is not difficult to place blame. The energy path must be translated..
Easily said but not always easy to apply. Most systems are based  in a XYG theory. Three points should get you there. That applies to most pre-reg systems. If all are not in (close to) perfect synergy then yes, there can be questions as to whether this works. I can tell you it does.
Not selling anything just been there with foots on the ground!

Offline ericheartsu

  • Gonzo Member
  • ******
  • Posts: 3142
Re: 10 minute tri lock set up
« Reply #19 on: March 22, 2019, 08:00:32 PM »
Hey I got a follow up-

Does anyone know of some vids showing skilled load/unloaders and how the support crew works around them? 

Once you get setup improved this seems to be the next major challenge.

THIS IS A GREAT QUESTION.
Night Owls Print Shop
Custom Textile and Flastock Screen Printing www.nightowlsprint.com 281.741.7285

Offline RICK STEFANICK

  • Gonzo Member
  • ******
  • Posts: 1612
Re: 10 minute tri lock set up
« Reply #20 on: March 28, 2019, 03:57:19 PM »
That's what i am working on but wanted to lay it out in the manual then our floor managers will demonstrate to the 16 press teams how to do just that. I'm not sure if i can post a video.