Author Topic: Thread errors  (Read 732 times)

Offline travis.hoyme

  • Verified/Junior
  • **
  • Posts: 60
Thread errors
« on: March 19, 2019, 06:35:27 PM »
I’m having issues with breaks in my stitching and with my design jumping off track in the bottom curve of the N


Sent from my iPhone using Tapatalk


Offline cbjamel

  • Gonzo Member
  • ******
  • Posts: 1088
Re: Thread errors
« Reply #1 on: March 20, 2019, 12:54:20 AM »
one of two ideas, 1 raise it on the cap, 2 tighten up the stitches or both.
Shane

Sent from my SAMSUNG-SM-G890A using Tapatalk


Offline mooseman

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2215
Re: Thread errors
« Reply #2 on: March 20, 2019, 08:24:43 AM »
Multiple possibles here..
no 1 look at the design is there something in the stitches in that area that cause the thread to skip.
No 2 is this a spot in the design where the machine changes sewing speed ?
No 3 your hooping
no 4 hook timing
no 5 tensions combined with hook timing and hooping.
I think I see the stitches starting to go south a few stitches before the missed stitches. Also I see the same thing kind of starting in the little bit of the design I can see to the right in the picture. I would start by adding some additional tension in your bobbin and matching up the top thread. Do have a way to measure bobbin tension? Do you know how to drop test bobbin tension ?
reference   https://www.google.com/search?client=opera&q=drop+test+bobbin+tension&sourceid=opera&ie=UTF-8&oe=UTF-8

Some additional details would be helpful....multi head Y / N
sewing speed
needle size
machine brand
do you use needle plates for sewing hats....
mikemoose
« Last Edit: March 20, 2019, 08:42:08 AM by mooseman »
DUE TO CIRCUMSTANCES COMPLETELY WITHIN MY CONTROL YOU SHOULD GET YOUR OWN TEE SHIRT AND A SHARPIE MARKER BY NOON TOMORROW OR SIMPLY CALL SOMEONE WHO GIVES A SHIRT.