Author Topic: 2006 8/10 RPM auto press  (Read 823 times)

Offline mk162

  • Ludicrous Speed Member
  • *******
  • Posts: 7785
2006 8/10 RPM auto press
« on: April 02, 2019, 09:42:31 AM »
We upgraded our RPM and are selling our old one.  Cosmetically it's pretty rough, but it's a solid little machine.  It is crated and ready to ship, it just needs a new home.  All heads work great.  There are 2 flash units, both of which work, one needs some sockets replaced.  2 flashes it a little overkill for an 8 color, so we usually kept one as a backup.

Features:
Air locks for screens, squeegees and floodbars
Central off contact
Digital readout of print speed and pressure
Fully digital control of flashes, with percentage of power and time


It comes with a full set of platens, squeegees, & floodbars.  It was supposed to go to a broker to be refurbished and sold on consignment, but that didn't work out.  This is the reason I only have one photo of it...crated and on a truck to the shippers, where it currently sits.

$8,000.


Offline tonypep

  • Ludicrous Speed Member
  • *******
  • Posts: 5611
Re: 2006 8/10 RPM auto press
« Reply #1 on: April 02, 2019, 10:23:18 AM »
Good to know what is the footprint?

Offline mk162

  • Ludicrous Speed Member
  • *******
  • Posts: 7785
Re: 2006 8/10 RPM auto press
« Reply #2 on: April 02, 2019, 10:29:20 AM »
12' diameter

Here is a link to the specs:
http://www.realperformance.com/rpm.html
It's the 8/10 on this page. 

Offline GaryG

  • !!!
  • Hero Member
  • *****
  • Posts: 750
Re: 2006 8/10 RPM auto press
« Reply #3 on: April 02, 2019, 11:11:35 PM »
How's Rick doing?

Offline mk162

  • Ludicrous Speed Member
  • *******
  • Posts: 7785
Re: 2006 8/10 RPM auto press
« Reply #4 on: April 03, 2019, 08:30:06 AM »
I don't deal with Rick.  I go straight to the 2M for parts/service questions.  I never needed service calls on the machine, we just grease it, oil it and run it.

I did re-register it once.  That was actually pretty easy.