Author Topic: CCI-White plus base  (Read 1035 times)

Offline Pangea

  • !!!
  • Full Member
  • ***
  • Posts: 228
  • Jack of all trades, master of none.
CCI-White plus base
« on: April 26, 2019, 01:56:31 PM »
I read a post from a few years ago suggesting adding d/c base to CCI-white to help penetration. I wanted to see if anyone is doing that and if it helps?


Offline brandon

  • Gonzo Member
  • ******
  • Posts: 1698
Re: CCI-White plus base
« Reply #1 on: April 26, 2019, 02:32:14 PM »
Yes. Lots of variables like normal from type of blank to screen mesh selection and others but start with 10 percent, then 15 percent, and so on. Document everything. See what you like and more importantly what your clientele like. We print CCI every day all day. Love it

Offline Pangea

  • !!!
  • Full Member
  • ***
  • Posts: 228
  • Jack of all trades, master of none.
Re: CCI-White plus base
« Reply #2 on: April 26, 2019, 03:05:56 PM »
Awesome, thanks Brandon! Love the work you all are pumping out.

Offline RICK STEFANICK

  • Gonzo Member
  • ******
  • Posts: 1925
  • INDUSTRY CONSULTANT-OPERATIONS SPECIALIST
Re: CCI-White plus base
« Reply #3 on: April 26, 2019, 03:20:10 PM »
YEP AT LEAST 20 PERCENT BASE
Specializing in shop assessment's, flow and efficiency