Author Topic: Some Roq parts.... and I don't have a Roq!  (Read 1157 times)

Offline BrazosDesigns

  • Full Member
  • ***
  • Posts: 106
Some Roq parts.... and I don't have a Roq!
« on: August 07, 2019, 10:29:05 PM »
So, last June I purchased a Sidewinder 6/6 w/airlocks from a screen printer in Vancouver, WA.   I posted about the problems with the pallets, didn't get anywhere with Grandline, and had to buy a new set.  But, there was a box of parts for a Roq that got shipped with the press.  I contacted the seller, they didn't want them, so here we are......trying to get rid of and recoup some loss, or at least lost space in the shop.

In this box is:
4 cans of touch up paint for the Roq press
New can of VT 800 Roq press lube ($35 on Ryonet site)
Some fuses (various sizes) and cables
A new sensor of some sort
4 registration gates (may or may not be for a Row)
Various screws
A usb drive (white box) that probably has software, bitcoins, who knows....
Manual....
etc.

So, let me know if you want it, want to offer any $$, and provide a shipping label and I'll package it better and get it to you.  I'm south of Houston about an hour, so someone there might want to drive down......

I'm also looking for a couple 18x22" M&R pallets.....

Thanks for looking,
Darren



Offline Colin

  • !!!
  • Gonzo Member
  • ******
  • Posts: 1592
  • Ink and Chemical Product Manager
Re: Some Roq parts.... and I don't have a Roq!
« Reply #1 on: August 07, 2019, 10:35:56 PM »
if that was the Grandline I know, there may be some bitcoin ;)
Been in the industry since 1996.  5+ years with QCM Inks.  Been a part of shops of all sizes and abilities both as a printer and as an Artist/separator.  I am now the Ink and Chemical Product Manager at Ryonet.

Offline ericheartsu

  • Gonzo Member
  • ******
  • Posts: 3265
Re: Some Roq parts.... and I don't have a Roq!
« Reply #2 on: August 08, 2019, 10:16:24 AM »
So, last June I purchased a Sidewinder 6/6 w/airlocks from a screen printer in Vancouver, WA.   I posted about the problems with the pallets, didn't get anywhere with Grandline, and had to buy a new set.  But, there was a box of parts for a Roq that got shipped with the press.  I contacted the seller, they didn't want them, so here we are......trying to get rid of and recoup some loss, or at least lost space in the shop.

In this box is:
4 cans of touch up paint for the Roq press
New can of VT 800 Roq press lube ($35 on Ryonet site)
Some fuses (various sizes) and cables
A new sensor of some sort
4 registration gates (may or may not be for a Row)
Various screws
A usb drive (white box) that probably has software, bitcoins, who knows....
Manual....
etc.

So, let me know if you want it, want to offer any $$, and provide a shipping label and I'll package it better and get it to you.  I'm south of Houston about an hour, so someone there might want to drive down......

I'm also looking for a couple 18x22" M&R pallets.....

Thanks for looking,
Darren

Send me some pics, maybe we'll take them! [email protected]
Night Owls Print Shop
Custom Textile and Flastock Screen Printing www.nightowlsprint.com 281.741.7285

Offline BrazosDesigns

  • Full Member
  • ***
  • Posts: 106
Re: Some Roq parts.... and I don't have a Roq!
« Reply #3 on: August 08, 2019, 11:56:08 AM »
Ooops!  Pic didn't get attached to first post.


Offline BrazosDesigns

  • Full Member
  • ***
  • Posts: 106
Re: Some Roq parts.... and I don't have a Roq!
« Reply #4 on: August 08, 2019, 12:03:14 PM »
Eric said is looks like some parts for the dryer, too. 

Let me know who wants it......
Darren

Offline gotshirtz001

  • Full Member
  • ***
  • Posts: 128
Some Roq parts.... and I don't have a Roq!
« Reply #5 on: August 08, 2019, 02:06:27 PM »
I’ve got spare 16x22 pallets. $85 ea


Sent from my iPhone using Tapatalk
« Last Edit: August 08, 2019, 09:52:39 PM by gotshirtz001 »
I'm flexible until I'm not