Classified Ads > Private listings

Some Roq parts.... and I don't have a Roq!

(1/2) > >>

BrazosDesigns:
So, last June I purchased a Sidewinder 6/6 w/airlocks from a screen printer in Vancouver, WA.   I posted about the problems with the pallets, didn't get anywhere with Grandline, and had to buy a new set.  But, there was a box of parts for a Roq that got shipped with the press.  I contacted the seller, they didn't want them, so here we are......trying to get rid of and recoup some loss, or at least lost space in the shop.

In this box is:
4 cans of touch up paint for the Roq press
New can of VT 800 Roq press lube ($35 on Ryonet site)
Some fuses (various sizes) and cables
A new sensor of some sort
4 registration gates (may or may not be for a Row)
Various screws
A usb drive (white box) that probably has software, bitcoins, who knows....
Manual....
etc.

So, let me know if you want it, want to offer any $$, and provide a shipping label and I'll package it better and get it to you.  I'm south of Houston about an hour, so someone there might want to drive down......

I'm also looking for a couple 18x22" M&R pallets.....

Thanks for looking,
Darren

Colin:
if that was the Grandline I know, there may be some bitcoin ;)

ericheartsu:

--- Quote from: BrazosDesigns on August 07, 2019, 10:29:05 PM ---So, last June I purchased a Sidewinder 6/6 w/airlocks from a screen printer in Vancouver, WA.   I posted about the problems with the pallets, didn't get anywhere with Grandline, and had to buy a new set.  But, there was a box of parts for a Roq that got shipped with the press.  I contacted the seller, they didn't want them, so here we are......trying to get rid of and recoup some loss, or at least lost space in the shop.

In this box is:
4 cans of touch up paint for the Roq press
New can of VT 800 Roq press lube ($35 on Ryonet site)
Some fuses (various sizes) and cables
A new sensor of some sort
4 registration gates (may or may not be for a Row)
Various screws
A usb drive (white box) that probably has software, bitcoins, who knows....
Manual....
etc.

So, let me know if you want it, want to offer any $$, and provide a shipping label and I'll package it better and get it to you.  I'm south of Houston about an hour, so someone there might want to drive down......

I'm also looking for a couple 18x22" M&R pallets.....

Thanks for looking,
Darren

--- End quote ---

Send me some pics, maybe we'll take them! [email protected]

BrazosDesigns:
Ooops!  Pic didn't get attached to first post.

BrazosDesigns:
Eric said is looks like some parts for the dryer, too. 

Let me know who wants it......
Darren

Navigation

[0] Message Index

[#] Next page

Go to full version