screen printing > General Screen Printing
Printing on POOL TABLE cloth
Ross_S:
OK guys anyone done this? I play a lot of pool and have been asked for years about this. I gave it a try yesterday using waterbase inks since they will reside in the fabric and not disturb the path of the ball.
The felt takes the heat just fine but it can be scratched off due to the teflon coating of the felt. So if anyone could give me a tip on this I would greatly appreciate it. I don't know if the coating can be removed but it seems like that would effect the play of the felt so I'd rather not try that.
Ross
blue moon:
Did you try discharge?
Pierre
Ross_S:
I didn't try discharge because everyone wants black and I don't think I can penetrate it enough but I'll give it a go tomorrow anyways just to see.
numbercruncher:
There are a number of pool table felt manufacturers - I'm not sure they are all made the same or with any topical treatments. Perhaps this might make a difference? - I do recall (let's say 30 years ago) that Jack Daniels did have there name and logo in white on black cloth for pool tables.
screenxpress:
I guess you could reach out to these folks.....to see if they would give up any tips.
https://monsterbreakbilliard.com/custom-pool-table-cloth/?gclid=CjwKCAjwkenqBRBgEiwA-bZVtv1tcX_A9L-jA2g-pHNL9cY3nHJ_ayUjnk1uYwJq5yxvkqD-IefPFBoCv_YQAvD_BwE
You can find others with a Google search with "pool table felt with logo"
On a personal note, back in the days when I did a little hustling, I would have found a print in the middle of the felt terribly distracting.
Navigation
[0] Message Index
[#] Next page
Go to full version