Author Topic: MX vs. Epic Rio Mixing systems by Wilflex?  (Read 1495 times)

Offline K-scope

  • Newbie
  • *
  • Posts: 2
MX vs. Epic Rio Mixing systems by Wilflex?
« on: September 18, 2019, 07:28:36 PM »
Hi guys and gals.
I'm looking into the MX and Rio mixing systems that Wilflex offers. We currently do all mixing by eye with no official mixing system.
Rio is the newer system that's supposed to be more Opaque with a lower cure temp. Does anybody have experience with both of these systems? Has anyone switched from MX to Rio? is there a noticeable difference in the finished print etc...
Any insight is welcomed and appreciated.
Thanks
« Last Edit: September 18, 2019, 07:55:38 PM by K-scope »


Offline Prince Art

  • Hero Member
  • *****
  • Posts: 793
Re: MX vs. Epic Rio Mixing systems by Wilflex?
« Reply #1 on: September 19, 2019, 01:11:05 PM »
Cannot speak from experience on MX or Rio, but Rio has gotten a lot of good reviews here. This much I can say from experience: nearly  ANY mixing system will make your life easier than mixing by eye! (And you'll waste a lot less ink.)

We use Rutland M3, pleased with matches; also have Wilflex PC, but have found that it is not good for very small batches - it requires too much precision. I'd like to give Rio a try, but have yet to get around to it.
Nice guys laugh last.

Offline T Shirt Farmer

  • Hero Member
  • *****
  • Posts: 832
Re: MX vs. Epic Rio Mixing systems by Wilflex?
« Reply #2 on: September 19, 2019, 01:31:15 PM »
it requires too much precision. I'd like to give Rio a try, but have yet to get around to it.

This why Rio Rocks super easy and predictable to mix, unless you are doing a lot of specialty inks no reason I can see to have a pigment system.
Robert
allpremiums.com
Your Source for Decorated Apparel.

Offline RICK STEFANICK

  • Gonzo Member
  • ******
  • Posts: 1925
  • INDUSTRY CONSULTANT-OPERATIONS SPECIALIST
Re: MX vs. Epic Rio Mixing systems by Wilflex?
« Reply #3 on: September 19, 2019, 01:47:49 PM »
it requires too much precision. I'd like to give Rio a try, but have yet to get around to it.

This why Rio Rocks super easy and predictable to mix, unless you are doing a lot of specialty inks no reason I can see to have a pigment system.

 Cost would be the only consideration.
Specializing in shop assessment's, flow and efficiency

Online Frog

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 13945
  • Docendo discimus
Re: MX vs. Epic Rio Mixing systems by Wilflex?
« Reply #4 on: September 19, 2019, 02:09:32 PM »
I think that the major deciding factor justifying a pigment system over an RFU, would be the quantity mixed. Pigments fit better in a larger shop with larger minimums.
That rug really tied the room together, did it not?

Offline BP

  • Sr. Member
  • ****
  • Posts: 380
Re: MX vs. Epic Rio Mixing systems by Wilflex?
« Reply #5 on: September 19, 2019, 02:42:22 PM »
I was using the MX by Wilflex till about 8 years, I changed to M3 rutland and get really good match the first go around. Not so with Wilflex MX, and I was a wilflex user for over 20 years. (PC&MX)
SHIRT HAPPENS!

Offline Prince Art

  • Hero Member
  • *****
  • Posts: 793
Re: MX vs. Epic Rio Mixing systems by Wilflex?
« Reply #6 on: September 20, 2019, 10:52:37 AM »
I was using the MX by Wilflex till about 8 years, I changed to M3 rutland and get really good match the first go around. Not so with Wilflex MX, and I was a wilflex user for over 20 years. (PC&MX)

I've been happy with M3 color matching, too. Primary reason I consider switching is Wilflex provides all necessary CPSIA compliance docs & testing results, Rutland does not. In a small shop, being able to use one ink system for everything would be nice. And now the low cure factor is big, too. But it is hard to switch when you're already getting good matches!
Nice guys laugh last.

Offline K-scope

  • Newbie
  • *
  • Posts: 2
Re: MX vs. Epic Rio Mixing systems by Wilflex?
« Reply #7 on: September 20, 2019, 07:04:07 PM »
Hi Gang, I appreciate all the feedback on the Rio mixing system. You all seem to favor the idea of a mixing system which is great. I agree with most of you that a pigment based system may be too sophisticated for us as we aren't using a lot of different bases and probably mixing more in quarts than gallons (Thanks for you input Frog and T-shirt Farmer).

BP and Prince Art, I appreciate your info on the M3 system but I haven't used a lot of Rutland inks and probably don't want to switch my whole shop over at this point. But thank you for the info.

I'm going to purchase the Rio System. Thank you all for the input. I'll circle back to this thread after I've had some time to use it and give my review. This is a great place to gather feedback. Thanks for your participation!

Online Frog

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 13945
  • Docendo discimus
Re: MX vs. Epic Rio Mixing systems by Wilflex?
« Reply #8 on: September 20, 2019, 08:51:37 PM »
Hi Gang, I appreciate all the feedback on the Rio mixing system. You all seem to favor the idea of a mixing system which is great. I agree with most of you that a pigment based system may be too sophisticated for us as we aren't using a lot of different bases and probably mixing more in quarts than gallons (Thanks for you input Frog and T-shirt Farmer).

ion!

Quuarts aren't so bad. Years ago, I claimed the niche of screen printing jobs "too small to mess with" for most shops, and would sometimes mix less than a cup! Those days are pretty much behind me now, 35 years and I finally wised up, LOL!
That rug really tied the room together, did it not?