Author Topic: Sleeve pallet question  (Read 1769 times)

Offline Denis Kolar

  • Gonzo Member
  • ******
  • Posts: 2871
Sleeve pallet question
« on: May 20, 2011, 12:27:27 PM »
Here is another newbie question.

Where to attach the bracket to a sleeve pallet? (I know that it should be under the pallet :) )
I have a set of new sleeve pallets that I need to attach to the brackets and they look similar to these:


They have rounded edges and melamine coating, not plain like these.

Do I attach the bracket right under the wide area or i move it slightly forward to the narrow part.
A pic would be awesome if someone has these handy.
And BTW, this is for manual machine :)


Offline Frog

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 13945
  • Docendo discimus
Re: Sleeve pallet question
« Reply #1 on: May 20, 2011, 12:42:41 PM »
That board is obviously set up to mount a bracket in the back on the wide area.
That should also help on clearance issues since some brackets and press arms don't fit in some sleeves.

That's a good reason for the outrigger styles, that also, if double, allow both sleeves to be printed at the same time.

Here's the way I added mounts to my DIY's
« Last Edit: May 20, 2011, 12:45:59 PM by Frog »
That rug really tied the room together, did it not?