« previous next »
Pages: 1 [2]   Go Down

Author Topic: Film problem  (Read 3221 times)

Offline Frog

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 13952
  • Docendo discimus
Re: Film problem
« Reply #15 on: December 19, 2012, 12:34:01 PM »
Okay, so we're back to the "sticky emulsion" issue, but apparently, this particular film is especially and even ridiculously susceptible.
Logged
That rug really tied the room together, did it not?

Offline tonypep

  • Ludicrous Speed Member
  • *******
  • Posts: 5623
Re: Film problem
« Reply #16 on: December 19, 2012, 12:59:33 PM »
Thats right Andy. It's a combo of cheap film (the cheaper ones have shorter shelf life) and humidity/ damp emulsion. Perfect storm.
Logged

Offline ScreenFoo

  • Gonzo Member
  • ******
  • Posts: 1296
  • Semper Fidelis Tyrannosaurus
Re: Film problem
« Reply #17 on: December 19, 2012, 01:13:54 PM »
FWIW, I've run into the sticky emulsion/trashed cheap film issue with a number of emulsions--and relative humidity here averages about 15%.  Heat seems to be the big factor here--similar unit to 3Deeps.

One of the big reasons I've never seriously considered switching to a pure PP--they are much worse than the LX-680/Poly plus DC's I prefer using.

Logged
Pages: 1 [2]   Go Up
« previous next »