Author Topic: Plastisols on charcoal 6 col  (Read 1580 times)

Offline Dottonedan

  • Administrator
  • Ludicrous Speed Member
  • *****
  • Posts: 5875
  • Email me at art@designsbydottone.com
Plastisols on charcoal 6 col
« on: December 20, 2012, 08:35:40 PM »

Quoted from my customer.


Quote
This base screen was set up on a 225 s mesh, 305/34 mesh for all top colors. 6 colors total. I was able to run everything 1 pass super fast and the job ran 76 doz/hr. 200 shirts. We ran the job in under 20 min. pretty sweet.


Also, this was just put up on press with no adjustments to the registration. Setup was under 8 min.  Base was cut 20% with fashion soft for a super soft hand.
« Last Edit: December 20, 2012, 08:40:44 PM by Dottonedan »
Artist & Sim Process separator, Co owner of The Shirt Board, Past M&R Digital tech installer for I-Image machines. Over 28 yrs in the apparel industry. Apparel sales, http://www.designsbydottone.com  e-mail art@designsbydottone.com 615-821-7850


Offline JBLUE

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2036
Re: Plastisols on charcoal 6 col
« Reply #1 on: December 20, 2012, 08:56:24 PM »
:-* S mesh. Good stuff. Nice print.
www.inkwerksspd.com

We are all born ignorant, but one must work hard to remain stupid...... Ben Franklin