Author Topic: 3d foam  (Read 1389 times)

Offline cbjamel

  • Gonzo Member
  • ******
  • Posts: 1088
3d foam
« on: March 04, 2013, 01:15:51 PM »
Is there a better 3d foam than another. i hear 2 different stories about shrinking when heated. 1-does, 1-doesn't.

Help.
Shane


Offline Denis Kolar

  • Gonzo Member
  • ******
  • Posts: 2871
Re: 3d foam
« Reply #1 on: March 04, 2013, 01:31:42 PM »
I have been using foam sold by Madeira since the day one and never had issues with it.
I would not know about the other ones.

Offline cbjamel

  • Gonzo Member
  • ******
  • Posts: 1088
Re: 3d foam
« Reply #2 on: March 04, 2013, 01:46:13 PM »
Do you have to use a heat gun or dryer with it.
Shane

Offline Denis Kolar

  • Gonzo Member
  • ******
  • Posts: 2871
Re: 3d foam
« Reply #3 on: March 04, 2013, 02:06:16 PM »
No, I try to run it with as much density as possible on the thread. If I have few pieces picking out, I push them back in with tweezers and use one of those long lighters to heat it up.

Offline cbjamel

  • Gonzo Member
  • ******
  • Posts: 1088
Re: 3d foam
« Reply #4 on: March 04, 2013, 02:14:37 PM »
Ok are you using std 40 wt thread or the thicker 30 wt type?
Thanks for the info trying to improve our products.
Thanks,
Shane

Offline Denis Kolar

  • Gonzo Member
  • ******
  • Posts: 2871
Re: 3d foam
« Reply #5 on: March 04, 2013, 02:24:47 PM »
Just regular 40 weight

Offline dirkdiggler

  • Gonzo Member
  • ******
  • Posts: 1803
Re: 3d foam
« Reply #6 on: March 04, 2013, 02:56:20 PM »
Gunolds will puff better than all the rest, I have tried all of them.
If he gets up, we'll all get up, IT'LL BE ANARCHY!-John Bender