Author Topic: 3D puff smallest line width recommended  (Read 1283 times)

Offline cbjamel

  • Hero Member
  • *****
  • Posts: 908
3D puff smallest line width recommended
« on: March 05, 2013, 08:25:31 PM »
3D puff smallest line width recommended. Say 1.5mm, 2mm ???? Why is it your smallest line widths.

Thanks,
Shane


Offline DKgrafix

  • Gonzo Member
  • ******
  • Posts: 2852
  • Basement Squeegee Pusher (among other things)
Re: 3D puff smallest line width recommended
« Reply #1 on: March 06, 2013, 07:50:10 AM »
You would probably have to test that out.
Make a few lines all different thicknesses and sew them out.

I'm guessing around 2mm, but I never had to go that thin.

Offline cbjamel

  • Hero Member
  • *****
  • Posts: 908
Re: 3D puff smallest line width recommended
« Reply #2 on: March 06, 2013, 11:19:18 AM »
When doing the puff on say Flexfit are using a 75/11 needle or a bigger 80/12.
Thanks,
Shane

Offline JBLUE

  • !!!
  • Gonzo Member
  • ******
  • Posts: 2036
Re: 3D puff smallest line width recommended
« Reply #3 on: March 06, 2013, 04:22:39 PM »
80/12 for sure. Helps cut the foam. I am doing our first initial puff run right now. I noticed a difference between the two.
www.inkwerksspd.com

We are all born ignorant, but one must work hard to remain stupid...... Ben Franklin

Offline DKgrafix

  • Gonzo Member
  • ******
  • Posts: 2852
  • Basement Squeegee Pusher (among other things)
Re: 3D puff smallest line width recommended
« Reply #4 on: March 06, 2013, 05:35:47 PM »
75/11. Never tried the bigger ones or ever had issues with 75/11