TSB
Embroidery => General Embroidery => Topic started by: cbjamel on March 05, 2013, 08:25:31 PM
-
3D puff smallest line width recommended. Say 1.5mm, 2mm ???? Why is it your smallest line widths.
Thanks,
Shane
-
You would probably have to test that out.
Make a few lines all different thicknesses and sew them out.
I'm guessing around 2mm, but I never had to go that thin.
-
When doing the puff on say Flexfit are using a 75/11 needle or a bigger 80/12.
Thanks,
Shane
-
80/12 for sure. Helps cut the foam. I am doing our first initial puff run right now. I noticed a difference between the two.
-
75/11. Never tried the bigger ones or ever had issues with 75/11