TSB

screen printing => General Screen Printing => Topic started by: XG Print on March 14, 2018, 06:48:46 AM

Title: Printing white on Tye Dye... Bleed Blocker base or No?
Post by: XG Print on March 14, 2018, 06:48:46 AM
Hey.  We don’t get the chance to print tye-dyes often but this is the blue Jerry tye-dye with a white print. Do I need a bleed blocker or just P/F/P using Joes Poly white. Thanks guys.
Title: Re: Printing white on Tye Dye... Bleed Blocker base or No?
Post by: Robert Clark on March 14, 2018, 08:13:04 AM
If you have time, I would advise proper testing..

"Tye-Dye is like a box of Chocolate, you don't know what you are going to get "
Forest Gump
1994 
Title: Re: Printing white on Tye Dye... Bleed Blocker base or No?
Post by: Frog on March 14, 2018, 09:32:18 AM
I have only printed Tie Dye from San Mar, and "homemades" using the procion dyes from Dharma Trading, and have apparently been lucky as I sometimes didn't even bother with low bleed, let alone poly, or the really heavy artillery specialized blockers. I have printed them both before the dyeing and after.
That said, Robert's advice to test if possible is certainly good advice. He's probably seen a lot more than I have.
Title: Re: Printing white on Tye Dye... Bleed Blocker base or No?
Post by: SEPSINK on March 14, 2018, 11:14:05 AM
Ive had success in the past using a bleed blocking gray base.
Title: Re: Printing white on Tye Dye... Bleed Blocker base or No?
Post by: ScreenFoo on March 14, 2018, 11:35:37 AM
I have only printed Tie Dye from San Mar, and "homemades" using the procion dyes from Dharma Trading, and have apparently been lucky as I sometimes didn't even bother with low bleed, let alone poly, or the really heavy artillery specialized blockers. I have printed them both before the dyeing and after.
That said, Robert's advice to test if possible is certainly good advice. He's probably seen a lot more than I have.

This has been my experience as well.

As far as cotton goes, I've never had an issue with tie dyes, and always an issue with cheap camo. 
Murphy might reverse the situation now that I said that.  :)

Title: Re: Printing white on Tye Dye... Bleed Blocker base or No?
Post by: kirkwad on March 14, 2018, 12:13:49 PM
We always use Poly on tie-dye t's as a default. However we have printed Low Bleed accidentally before & didn't have an issue. It all depends on the garment & dye process. But if you ever print Comfort Colors, always use a bleed blocker base. They're the worst.