TSB

Direct to Garment => DTG - General => Topic started by: ffokazak on January 30, 2018, 12:34:07 PM

Title: Automatic industrial print head cleaners
Post by: ffokazak on January 30, 2018, 12:34:07 PM
Anyone have any Experience  with these?

For the cost of 1.5 Gen 4 heads, I can get a recovery system...

Just thinking ahead, as we now have 9 gen 4 heads in the shop....

If these are effective it may be worth it...

Anyone have experience?

Title: Re: Automatic industrial print head cleaners
Post by: blue moon on January 30, 2018, 03:58:56 PM
can you give us a link to the product? 'not really sure what you are talking about. . .

pierre
Title: Re: Automatic industrial print head cleaners
Post by: Jepaul on January 30, 2018, 04:04:20 PM
This works very well.  ROQ uses this to recondition print heads from the Hybrid Fuji Starfire heads. 

https://www.printheaddoctor.com/ (https://www.printheaddoctor.com/)
Title: Re: Automatic industrial print head cleaners
Post by: ffokazak on January 30, 2018, 05:13:43 PM
Yep the one above is what I'm talking about...

Looks like it would be worth it.

Obviously not if you have a head strike, but if its just cogged nozzles, you may be able to revive a pricey head

Title: Re: Automatic industrial print head cleaners
Post by: ffokazak on January 30, 2018, 05:38:05 PM
I just bought one, I will definitely update you guys with the experience, and maybe even setup a service if anyone needs heads cleaned!

Cheers!

Title: Re: Automatic industrial print head cleaners
Post by: blue moon on January 30, 2018, 05:44:27 PM
I just bought one, I will definitely update you guys with the experience, and maybe even setup a service if anyone needs heads cleaned!

Cheers!

That sounds like a pretty good idea! Which heads does it support?

pierre
Title: Re: Automatic industrial print head cleaners
Post by: ffokazak on January 30, 2018, 06:25:23 PM
A list so vast, it makes me realize I know very little about industrial print heads!

Title: Re: Automatic industrial print head cleaners
Post by: Alex M on January 30, 2018, 10:31:12 PM
Be VERY careful!!!
The solvents they send with those units are strong! A couple of them delaminated some of the gen 4 heads we cleaned. Just make sure you pay close attention to their instructions.


Sent from my iPhone using Tapatalk