TSB

screen printing => Show Your Stuff => Topic started by: Robert Clark on January 23, 2017, 09:26:23 AM

Title: Badger Camo Tees
Post by: Robert Clark on January 23, 2017, 09:26:23 AM

Hi Everybody,

 Just wanted to post some pics of our testing on the Badger Camo shirts.

Printing Steps

ELT DIGITAL BLACK –PFP 11O MESH
ELT-S WHITE- PFP 11O MESH
CURED OUT AT 290

The prints have held up very strong over the weekend and after 3 washes. A nice smooth print that lays flat on the shirt.

Get ready to see a lot of these with the upcoming baseball season quickly approaching.

Just let us know if you have any questions.

 

Title: Re: Badger Camo Tees
Post by: Sbrem on January 23, 2017, 10:13:51 AM

those look good, especially on the Badger, pretty bad bleeders. Did you test with single hits of black and white as well and it just didn't quite work?

Steve

Title: Re: Badger Camo Tees
Post by: Robert Clark on January 23, 2017, 10:21:43 AM

We did test with one hit of each .. Did not turn well. But even with 4 hits (2 black, 2 white ) on the shirt. It turned out a very lightweight print with a nice matte finish.