21
General Embroidery / Re: I need help if anyone knows..
« Last post by Admiral on April 11, 2024, 04:51:38 PM »Thanks guys, should have said tajima..
Im taking the back off and check wires too. Talked to Pinpoint, if I need a new screen, send them control panel and $900 bucks.
If CPU board (but he said normally thats a white screen) $5-$6K or more..
All 3 of our old single heads have the CPU boards with intermittent issues, we replaced one of them for the upgraded unit for $7K a couple of years ago. The other 2 work most of the time and come back often enough we are not going to spend $7K each on a machine worth 7K.
Your display is different than our full whitescreen though. These are X-16 controllers that have failed us, on all 3 of our first embroidery machines. We did not get good support from Hirsch/Tajima on a real fix unfortunately. Refurb X-16s are about $2500 and probably going to fail again. X-21 is the controller to update too but too expensive.