TSB

Embroidery => General Embroidery => Topic started by: rmonks on January 29, 2019, 04:31:16 PM

Title: Deleating a design mid sew
Post by: rmonks on January 29, 2019, 04:31:16 PM

I am new to embroidery I have a SWF 1501 single head . I was sewing a design and the needle broke and screwed the thread up. I had to remove the hoop and I want to know if I can cancel what i was sewing even though it did not finish, or do i have to let the machine finish sewing the design.

Title: Re: Deleating a design mid sew
Post by: Printficient on January 29, 2019, 04:42:50 PM

You should be able to back up the needle a little bit and continue

Title: Re: Deleating a design mid sew
Post by: cbjamel on January 29, 2019, 06:31:33 PM

to go back to original start place and start over push and hold set key till it beeps.
shane

Sent from my SAMSUNG-SM-G890A using Tapatalk

Title: Re: Deleating a design mid sew
Post by: rmonks on January 29, 2019, 06:40:29 PM

Thanks CB Holding the set button till it beeb's WORKED.

Title: Re: Deleating a design mid sew
Post by: cbjamel on January 29, 2019, 08:07:37 PM

Yep I have swf so i understand.
Shane

Sent from my SAMSUNG-SM-G890A using Tapatalk