TSB
Direct to Garment => DTG - General => Topic started by: ffokazak on January 30, 2018, 12:34:07 PM
-
Anyone have any Experience with these?
For the cost of 1.5 Gen 4 heads, I can get a recovery system...
Just thinking ahead, as we now have 9 gen 4 heads in the shop....
If these are effective it may be worth it...
Anyone have experience?
-
can you give us a link to the product? 'not really sure what you are talking about. . .
pierre
-
This works very well. ROQ uses this to recondition print heads from the Hybrid Fuji Starfire heads.
https://www.printheaddoctor.com/ (https://www.printheaddoctor.com/)
-
Yep the one above is what I'm talking about...
Looks like it would be worth it.
Obviously not if you have a head strike, but if its just cogged nozzles, you may be able to revive a pricey head
-
I just bought one, I will definitely update you guys with the experience, and maybe even setup a service if anyone needs heads cleaned!
Cheers!
-
I just bought one, I will definitely update you guys with the experience, and maybe even setup a service if anyone needs heads cleaned!
Cheers!
That sounds like a pretty good idea! Which heads does it support?
pierre
-
A list so vast, it makes me realize I know very little about industrial print heads!
-
Be VERY careful!!!
The solvents they send with those units are strong! A couple of them delaminated some of the gen 4 heads we cleaned. Just make sure you pay close attention to their instructions.
Sent from my iPhone using Tapatalk